#
# Deprecated variables
#
# This section is intentionally left at the top of the Makefile so it won't be ignored.
#
ifdef BUILD_SCRATCH_TARGET
# deprecated in 5.19.0
$(warning WARNING: BUILD_SCRATCH_TARGET will be deprecated in a later release, use BUILD_TARGET instead.)
BUILD_TARGET:=$(BUILD_SCRATCH_TARGET)
endif
include Makefile.variables
# This deprecation message must come after GIT is set in Makefile.variables.
ifneq ($(GIT),git)
# deprecated in 5.20.0
$(warning WARNING: GIT($(GIT)) will be deprecated in a later release.)
endif
# These entries are 'duplicates' of variables specified in Makefile.variables
# that are used in the SPEC file. Specifying these with a SPEC prefix indicates
# that the value is passed through to the spec file.
SPECRELEASED_KERNEL=$(RELEASED_KERNEL)
SPECINCLUDE_FEDORA_FILES=$(INCLUDE_FEDORA_FILES)
SPECINCLUDE_RHEL_FILES=$(INCLUDE_RHEL_FILES)
ifneq (,$(findstring n,$(firstword -$(MAKEFLAGS))))
# Do not set RHTEST on the command line. Use the make command built-in options
# -n, --just-print, --dry-run, --recon on the command line.
RHTEST=1
endif
LANG=C
ifndef RHSELFTESTDATA
TOPDIR:=$(shell $(GIT) rev-parse --show-toplevel)
else
# change TOPDIR to be relative
TOPDIR:=..
# RHEL_RELEASE may be updated which will cause a difference with the BUILD variable
RHEL_RELEASE:=6
BUILD:=$(RHEL_RELEASE)
endif
REDHAT:=$(TOPDIR)/redhat
include $(TOPDIR)/Makefile.rhelver
ifndef RHDISTDATADIR
RHDISTDATADIR=${REDHAT}/self-test/data
endif
RPMBUILD:=$(shell if [ -x "/usr/bin/rpmbuild" ]; then echo rpmbuild; \
else echo rpm; fi)
MACH:=$(shell uname -m)
SPECKVERSION:=$(shell $(GIT) show $(HEAD):Makefile | sed -ne '/^VERSION\ =\ /{s///;p;q}')
SPECKPATCHLEVEL:=$(shell $(GIT) show $(HEAD):Makefile | sed -ne '/^PATCHLEVEL\ =\ /{s///;p;q}')
SPECKSUBLEVEL:=$(shell $(GIT) show $(HEAD):Makefile | sed -ne '/^SUBLEVEL\ =\ /{s///;p;q}')
SPECKEXTRAVERSION:=$(shell $(GIT) show $(HEAD):Makefile | sed -ne '/^EXTRAVERSION\ =\ /{s///;p;q}')
GITID:= $(shell $(GIT) log --max-count=1 --pretty=format:%H $(HEAD))
ifndef RHSELFTESTDATA
BUILD:=$(RHEL_RELEASE)
endif
FLAVOR=
CURARCH := $(shell uname -m)
ARCHCONFIG := $(shell uname -m | sed -e s/x86_64/X86_64/ \
-e s/s390x/S390/ -e s/ppc.*/PPC/ )
# rpm information
SPECFILE:=$(PACKAGE_NAME).spec
RPM:=$(REDHAT)/rpm
SRPMS:=$(RPM)/SRPMS
SOURCES:=$(RPM)/SOURCES
TESTPATCH:=$(REDHAT)/linux-kernel-test.patch
SPECCHANGELOG:=$(PACKAGE_NAME).changelog-$(RHEL_MAJOR).$(RHEL_MINOR)
ARCH_LIST=aarch64 ppc64le s390x x86_64
ifndef DISTRO
ifneq ($(findstring .fc,$(DIST)),)
DISTRO := fedora
else
DISTRO := rhel
endif
endif
ifndef RHJOBS
RHJOBS=$(shell j=$$(echo $(MAKEFLAGS) | grep -Eo "(^|[ ])-j[0-9]*" | xargs ); \
if [ -z "$${j}" ]; then \
echo "1"; \
else \
j=$$(echo "$${j}" | tr -d "\-j"); \
[ -z "$${j}" ] && nproc || echo $${j}; \
fi)
endif
LOCVERFILE:=../localversion
# create an empty localversion file if you don't want a local buildid
ifneq ($(wildcard $(LOCVERFILE)),)
DISTLOCALVERSION:=$(shell cat $(LOCVERFILE))
$(info DISTLOCALVERSION is "$(DISTLOCALVERSION)". Update '$(shell dirname $(REDHAT))/localversion' to change.)
else
ifeq ($(origin BUILDID),undefined)
ifeq ($(DISTLOCALVERSION),)
DISTLOCALVERSION:=.test
endif
else
# Do NOT drop the ability to use BUILDID! Keep backwards compatibility to be
# able to build all RHEL kernels the same way.
DISTLOCALVERSION:=$(BUILDID)
endif
$(info DISTLOCALVERSION is "$(DISTLOCALVERSION)".)
endif
# options for process_configs.sh script
ifdef NO_CONFIGCHECKS
PROCESS_CONFIGS_OPTS=
PROCESS_CONFIGS_CHECK_OPTS=
BUILDOPTS += -configchecks
else
PROCESS_CONFIGS_CHECK_OPTS=-n -t -c
PROCESS_CONFIGS_OPTS=-n -w -c
endif
# this section is needed in order to make O= to work
_OUTPUT := ..
ifeq ("$(origin O)", "command line")
_OUTPUT := $(O)
_EXTRA_ARGS := O=$(_OUTPUT)
endif
# MARKER is the upstream git tag which we base off of for exporting patches.
# MARKER (and UPSTREAM_TARBALL_NAME) must use SPECKVERSION, SPECKPATCHLEVEL,
# SPECKEXTRAVERSION, and SPECKSUBLEVEL from the top-level kernel makefile as
# opposed to any adjusted version for snapshotting.
ifneq ($(SPECKEXTRAVERSION),)
UPSTREAMBUILD:=0$(shell echo $(SPECKEXTRAVERSION) | sed -e s/-/./).
UPSTREAM_TARBALL_NAME:=$(SPECKVERSION).$(SPECKPATCHLEVEL)$(SPECKEXTRAVERSION)
else
ifeq ($(SPECKSUBLEVEL),0)
UPSTREAM_TARBALL_NAME:=$(SPECKVERSION).$(SPECKPATCHLEVEL)
else
# MARKER (and UPSTREAM_TARBALL_NAME) must use SPECKVERSION,
# SPECKPATCHLEVEL, and SPECKSUBLEVEL from the top-level kernel makefile as
# opposed to any adjusted version for snapshotting. IOW, these variables are
# *NOT* equivalent to the SPECVERSION variable.
UPSTREAM_TARBALL_NAME:=$(SPECKVERSION).$(SPECKPATCHLEVEL).$(SPECKSUBLEVEL)
endif
UPSTREAMBUILD:=
endif
MARKER:=v$(UPSTREAM_TARBALL_NAME)
# If VERSION_ON_UPSTREAM is set, the versioning of the rpm package is based
# on a branch tracking upstream. This allows for generating rpms
# based on untagged releases.
ifndef VERSION_ON_UPSTREAM
ifeq ("$(DISTRO)", "fedora")
VERSION_ON_UPSTREAM:=1
else
VERSION_ON_UPSTREAM:=0
endif
endif
UPSTREAM:=$(shell $(GIT) rev-parse -q --verify origin/$(UPSTREAM_BRANCH) || \
$(GIT) rev-parse -q --verify $(UPSTREAM_BRANCH))
ifeq ($(VERSION_ON_UPSTREAM),1)
# UPSTREAM_BRANCH is expected to track mainline.
ifeq ($(UPSTREAM),)
$(error "Missing an $(UPSTREAM_BRANCH) branch")
endif
MERGE_BASE:=$(shell $(GIT) merge-base $(HEAD) $(UPSTREAM))
_TAG:=$(shell $(GIT) describe $(MERGE_BASE))
# a snapshot off of a tagged git is of the form [tag]-[cnt]-g[hash]
SNAPSHOT:=$(shell echo $(_TAG) | grep -c '\-g')
ifeq ($(SNAPSHOT),1)
# The base for generating tags is the snapshot commit
MARKER:=$(shell echo $(_TAG) | awk -F "-g" '{ print $$2 }')
# The merge window is weird because the actual versioning hasn't
# been updated but we still need something that works for
# packaging. Fix this by bumping the patch level and marking
# this as rc0
ifeq ($(SPECKEXTRAVERSION),)
UPSTREAMBUILD:=0.rc0.
SPECKPATCHLEVEL:=$(shell expr $(SPECKPATCHLEVEL) + 1)
endif
ifndef UPSTREAMBUILD_GIT_ONLY
ifneq ($(filter $(MAKECMDGOALS),dist-git-test dist-git),)
UPSTREAMBUILD_GIT_ONLY:=0
else
UPSTREAMBUILD_GIT_ONLY:=1
endif
endif
ifeq ($(UPSTREAMBUILD_GIT_ONLY),1)
UPSTREAMBUILD:=$(UPSTREAMBUILD)$(MARKER).
else
# Obtain the date that HEAD was committed (not the snapshot commit).
HEAD_DATE:=$(shell $(GIT) show -s --format=%cd --date=format:%Y%m%d $(HEAD))
UPSTREAMBUILD:=$(UPSTREAMBUILD)$(HEAD_DATE)git$(MARKER).
endif
UPSTREAM_TARBALL_NAME:=$(patsubst v%,%,$(_TAG))
endif
else
SNAPSHOT:=0
ifneq ($(ADD_COMMITID_TO_VERSION),)
_EXACT_TAG:=$(shell $(GIT) describe --exact-match 2>/dev/null)
ifeq ($(_EXACT_TAG),)
_TAG:=$(shell $(GIT) describe 2>/dev/null)
ifneq ($(_TAG),)
_BUILDCOMMIT:=$(shell echo $(_TAG) | awk -F- '{ printf(".%s", $$(NF)) }' | cut -c 1-6)
BUILD:=$(BUILD)$(_BUILDCOMMIT)
endif
endif
endif
endif
# This section contains the variables that represent the kernel rpm's NVR.
# The NVR looks like, for example, kernel-5.17.0-0.rc8.551acdc3c3d2.124.test.fc35.
# This string can be deconstructed as
#
# $(PACKAGE_NAME)-$(SPECKVERSION).$(SPECKPATCHLEVEL).$(SPECKSUBLEVEL)-$(UPSTREAMBUILD)$(BUILD)$(DISTLOCALVERSION)$(DIST)
#
# This can be evaluated as
#
# $(PACKAGE_NAME)-$(SPECKVERSION).$(SPECKPATCHLEVEL).$(SPECKSUBLEVEL)-$(SPECBUILD) $(DIST)
# $(PACKAGE_NAME)-$(SPECVERSION) -$(SPECBUILD) $(DIST)
# $(PACKAGE_NAME)-$(BASEVERSION) $(DIST)
# $(RELEASETAG) $(DIST)
#
SPECBUILD:=$(UPSTREAMBUILD)$(BUILD)$(DISTLOCALVERSION)
SPECVERSION:=$(SPECKVERSION).$(SPECKPATCHLEVEL).$(SPECKSUBLEVEL)
BASEVERSION:=$(SPECVERSION)-$(SPECBUILD)
RELEASETAG:=$(PACKAGE_NAME)-$(BASEVERSION)
SRPM:=$(SRPMS)/$(RELEASETAG)$(DIST).src.rpm
#
# This conditional statement is where fedora, centos, and other (aka RHEL)
# specific values should be set.
#
ifeq ("$(DISTRO)", "fedora")
RHDISTGIT_BRANCH:=rawhide
ifndef BUILD_TARGET
BUILD_TARGET:=rawhide
endif
# The Fedora tarfile name is based on an upstream tag as users may
# replace the tarball from one with upstream, rebuild, and then deploy
# without changing anything else in the specfile.
SPECTARFILE_RELEASE:=$(UPSTREAM_TARBALL_NAME)
SPECKABIVERSION:=$(SPECVERSION)
DISTRELEASETAG:=$(RELEASETAG)
DISTBASEVERSION:=$(BASEVERSION)
else ifeq ("$(DISTRO)", "centos")
RHDISTGIT_BRANCH:=c$(RHEL_MAJOR)s
ifndef BUILD_PROFILE
BUILD_PROFILE:= -p stream
endif
ifndef BUILD_TARGET
BUILD_TARGET:=c$(RHEL_MAJOR)s-candidate
endif
SPECTARFILE_RELEASE:=$(BASEVERSION)$(DIST)
SPECKABIVERSION:=$(BASEVERSION)$(DIST)
DISTRELEASETAG:=$(RELEASETAG)$(DIST)
DISTBASEVERSION:=$(BASEVERSION)$(DIST)
PATCHLIST_URL:=none
else
RHDISTGIT_BRANCH:=rhel-$(RHEL_MAJOR).$(RHEL_MINOR).0
ifndef BUILD_TARGET
ifeq ("$(DIST)", ".eln")
BUILD_TARGET:=eln
else
# This value is used by the dist[g]-targets. Changing this value has significant
# consequences for all of RHEL kernel engineering.
BUILD_TARGET:=rhel-$(RHEL_MAJOR).$(RHEL_MINOR).0-test-pesign
endif
endif
ifeq ("$(DIST)", ".eln)
DISTRELEASETAG:=$(RELEASETAG)
DISTBASEVERSION:=$(BASEVERSION)
SPECTARFILE_RELEASE:=$(BASEVERSION)
SPECKABIVERSION:=$(BASEVERSION)
else
DISTRELEASETAG:=$(RELEASETAG)$(DIST)
DISTBASEVERSION:=$(BASEVERSION)$(DIST)
SPECTARFILE_RELEASE:=$(BASEVERSION)$(DIST)
SPECKABIVERSION:=$(BASEVERSION)$(DIST)
endif
PATCHLIST_URL:=none
endif
TARFILE:=linux-$(SPECTARFILE_RELEASE).tar.xz
TARBALL:=$(REDHAT)/$(TARFILE)
KABI_TARBALL:=$(SOURCES)/kernel-abi-stablelists-$(SPECKABIVERSION).tar.bz2
KABIDW := $(REDHAT)/kabi-dwarf
KABIDW_TARBALL:=$(SOURCES)/kernel-kabi-dw-$(SPECKABIVERSION).tar.bz2
include Makefile.rhpkg
ifeq ("$(ZSTREAM)", "yes")
YSTREAM_FLAG = no
ifeq ("$(origin RHDISTGIT_BRANCH)", "command line")
ZSTREAM_FLAG = branch
else
ZSTREAM_FLAG = yes
endif
BUILDOPTS += +kabidupchk
else
ZSTREAM_FLAG = no
ifeq ("$(EARLY_YSTREAM)", "yes")
YSTREAM_FLAG = early
else
YSTREAM_FLAG = yes
endif
endif
include Makefile.cross
#
# Targets
#
# Do not place variable declarations below this line. Variables are exported
# to scripts called in the targets below and do not need to be passed on the
# command-line.
#
default: dist-help
dist-python-check:
@if [ ! -x /usr/bin/python3 ]; then \
echo "ERROR: Python 3 is needed." ; \
exit 1; \
fi
dist-kabi: dist-python-check
@for KABIARCH in $(ARCH_LIST); do \
$(REDHAT)/kabi/show-kabi -k $(REDHAT)/kabi/kabi-module/ -m \
-a $$KABIARCH -r $(RHEL_MAJOR).$(RHEL_MINOR) > $(REDHAT)/kabi/Module.kabi_$$KABIARCH;\
for i in {0..$(RHEL_MINOR)}; do \
mkdir -p $(REDHAT)/kabi/kabi-rhel$(RHEL_MAJOR)$$i/;\
$(REDHAT)/kabi/show-kabi -k $(REDHAT)/kabi/kabi-module/ -s -a $$KABIARCH \
-r $(RHEL_MAJOR).$$i > $(REDHAT)/kabi/kabi-rhel$(RHEL_MAJOR)$$i/kabi_stablelist_$$KABIARCH;\
done;\
done;
@(cd $(REDHAT)/kabi/ && ln -Tsf kabi-rhel$(RHEL_MAJOR)$(RHEL_MINOR) kabi-current)
dist-kabi-dup: dist-python-check
@for KABIARCH in $(ARCH_LIST); do \
touch $(REDHAT)/kabi/Module.kabi_dup_$$KABIARCH;\
if [ -d $(REDHAT)/kabi/kabi-dup-module/kabi_$$KABIARCH ]; then \
$(REDHAT)/kabi/show-kabi -k $(REDHAT)/kabi/kabi-dup-module/ -m \
-a $$KABIARCH -r $(RHEL_MAJOR).$(RHEL_MINOR) > \
$(REDHAT)/kabi/Module.kabi_dup_$$KABIARCH;\
fi \
done;
dist-assert-tree-clean:
ifeq ($(FORCE),)
@if ! git diff-index --quiet --cached HEAD -- &> /dev/null; then \
echo "ERROR: staged changes found. Please clean the git tree."; >&2 \
git status; \
exit 1; \
fi
@if ! git diff-files --quiet &> /dev/null; then \
echo "ERROR: unstaged changes found. Please clean the git tree." >&2; \
git status; \
exit 1; \
fi
@if [ $$(git ls-files --exclude-standard --others | wc -l) -gt 0 ]; then \
echo "ERROR: untracked files found. Please clean the git tree." >&2; \
git status; \
exit 1; \
fi
endif
KABI_SUPPORTED_ARCHS ?= $(patsubst kabi_%,%,$(notdir $(wildcard kabi/kabi-module/*)))
export KABI_CROSS_COMPILE_PREFIX ?= /usr/bin/
export KABI_CROSS_COMPILE_SUFFIX ?= -linux-gnu-
KABI_CROSS_COMPILE = $(patsubst %,$(KABI_CROSS_COMPILE_PREFIX)%$(KABI_CROSS_COMPILE_SUFFIX),$(filter-out $(CURARCH),$(KABI_SUPPORTED_ARCHS)))
ifeq ($(ARCH),$(CURARCH))
dist-assert-cross-tools: # no dependencies when we're building for native arch
else
dist-assert-cross-tools: $(patsubst %,%gcc,$(KABI_CROSS_COMPILE))
endif
$(KABI_CROSS_COMPILE_PREFIX)%$(KABI_CROSS_COMPILE_SUFFIX)gcc:
@echo "ERROR: couldn't find cross compilation toolchain (looking for: $@)" >&2
@echo " override KABI_CROSS_COMPILE_PREFIX to set path (currently $(KABI_CROSS_COMPILE_PREFIX))" >&2
@echo " override KABI_CROSS_COMPILE_SUFFIX to set suffix (currently $(KABI_CROSS_COMPILE_SUFFIX))" >&2
@exit 1
ifeq ($(ARCH),)
dist-kabi-index: ARCH=$(CURARCH)
endif
dist-kabi-index:
: > $(REDHAT)/kabi/kabi-module/kabi_$(ARCH)/.index.json
for sym in $$(find $(REDHAT)/kabi/kabi-module/kabi_$(ARCH)/ -type f -not -name "*.*" \
-exec basename {} \;); do \
$(REDHAT)/kabi/symtypes index \
$(REDHAT)/kabi/kabi-module/kabi_$(ARCH)/.$$(basename $$sym) \
-o $(REDHAT)/kabi/kabi-module/kabi_$(ARCH)/.index.json || : ; \
done
ifeq ($(ARCH),)
dist-kabi-image-%: ARCH=$(CURARCH)
endif
dist-kabi-image-%: NODE = $(patsubst dist-kabi-image-%,%,$@)
dist-kabi-image-%: dist-kabi-index
$(REDHAT)/kabi/symtypes image -s $(NODE) -t $(REDHAT)/kabi/kabi-module/kabi_$(ARCH)/.index.json
ifeq ($(ARCH),)
dist-kabi-preimage-%: ARCH=$(CURARCH)
endif
dist-kabi-preimage-%: NODE = $(patsubst dist-kabi-preimage-%,%,$@)
dist-kabi-preimage-%: dist-kabi-index
@node="$(NODE)"; \
if [ "${node:1:1}" = "#" ]; then \
$(REDHAT)/kabi/symtypes preimage -s '$(NODE)' -t $(REDHAT)/kabi/kabi-module/kabi_$(ARCH)/.index.json; \
else \
for prefix in {E,e,s,t,u}; do \
$(REDHAT)/kabi/symtypes preimage -S -s "$$prefix#$(NODE)" -t $(REDHAT)/kabi/kabi-module/kabi_$(ARCH)/.index.json || :; \
done; \
fi
dist-symtype-diff: KABI_TOOL = $(REDHAT)/kabi/diff-kabi
dist-symtype-diff: dist-assert-cross-tools dist-assert-tree-clean dist-configs dist-symtype-shared
dist-kabi-update: KABI_TOOL = $(REDHAT)/kabi/update-kabi
dist-kabi-update: dist-assert-cross-tools dist-assert-tree-clean dist-configs dist-symtype-shared
dist-symtype-shared:
@declare -a _ARGS; \
declare -a _ARCHS; \
for symbol in $${SYMBOL:-}; do \
_ARGS=("$${_ARGS[@]}" -s "$$symbol"); \
done; \
if [ -n "$${SRC:-}" ]; then \
_ARGS=("$${_ARGS[@]}" $$SRC); \
fi; \
if [ -n "$${ARCH:-}" ]; then \
$(KABI_TOOL) -a $(ARCH) $${_ARGS[@]}; \
else \
cnt=1; \
for arch in $(KABI_SUPPORTED_ARCHS); do \
$(KABI_TOOL) -a $$arch $${_ARGS[@]} || : ; \
let cnt++; \
done; \
fi
dist-check-kabi: dist-kabi
@if [ ! -e $(_OUTPUT)/Module.symvers ]; then \
echo "ERROR: You must compile the kernel and modules first";\
exit 1;\
fi
@$(REDHAT)/kabi/check-kabi -k $(REDHAT)/kabi/Module.kabi_$(MACH) \
-s $(_OUTPUT)/Module.symvers
dist-check-kabi-dup: dist-kabi-dup
@if [ ! -e $(_OUTPUT)/Module.symvers ]; then \
echo "ERROR: You must compile the kernel and modules first";\
exit 1;\
fi
@$(REDHAT)/kabi/check-kabi -k $(REDHAT)/kabi/Module.kabi_dup_$(MACH) \
-s $(_OUTPUT)/Module.symvers
dist-kabi-dw-base: dist-kabi
@echo "Generating baseline dataset for KABI DWARF-based comparison..."
@echo "**** GENERATING DWARF-based kABI baseline dataset ****"
@$(KABIDW)/run_kabi-dw.sh generate \
$(REDHAT)/kabi/kabi-current/kabi_stablelist_$(CURARCH) \
$(_OUTPUT) $(KABIDW)/base/$(CURARCH)/
dist-kabi-dw-check: dist-kabi
@if [ ! -d $(KABIDW)/base/$(CURARCH) ]; then \
echo "**** ERROR: ****"; \
echo "Comparison base not found in $(KABIDW)/base/$(CURARCH)."; \
echo "Please run \"make dist-kabi-dw-base\" first!"; \
exit 1; \
fi
@echo "**** GENERATING DWARF-based kABI dataset ****"
@$(KABIDW)/run_kabi-dw.sh generate \
$(REDHAT)/kabi/kabi-current/kabi_stablelist_$(CURARCH) \
$(_OUTPUT) $(KABIDW)/base/$(CURARCH).tmp/
@echo "**** KABI DWARF-based comparison report ****"
@$(KABIDW)/run_kabi-dw.sh compare \
$(KABIDW)/base/$(CURARCH) $(KABIDW)/base/$(CURARCH).tmp || :
@echo "**** End of KABI DWARF-based comparison report ****"
@rm -rf $(KABIDW)/base/$(CURARCH).tmp
dist-configs-commit: dist-configs-prep
+@cd $(REDHAT)/configs; ./generate_all_configs.sh 1;\
./process_configs.sh -z "$(SPECVERSION)" "$(FLAVOR)"
dist-configs: dist-configs-prep
+@cd $(REDHAT)/configs; ./generate_all_configs.sh 1;\
./process_configs.sh $(PROCESS_CONFIGS_OPTS) "$(SPECVERSION)" ""
dist-fedora-configs: FLAVOR = fedora
dist-fedora-configs: dist-configs
fedora-configs: dist-fedora-configs
dist-rhel-configs: FLAVOR = rhel
dist-rhel-configs: dist-configs
rh-configs: dist-rhel-configs
dist-configs-check: dist-configs-prep
+cd $(REDHAT)/configs; ./process_configs.sh $(PROCESS_CONFIGS_CHECK_OPTS) "" ""
dist-configs-prep: dist-clean-configs
+cd $(REDHAT)/configs; ./build_configs.sh "partial" "snip"
+cd $(REDHAT)/configs; ./build_configs.sh "$(PACKAGE_NAME)" "$(FLAVOR)"
dist-configs-arch: ARCH_MACH = $(MACH)
dist-configs-arch: dist-configs
dist-clean-configs:
@cd $(REDHAT)/configs; rm -f kernel-*.config kernel-*.config.orig kernel-*.config.tmp
dist-clean-sources:
@rm -f $(RPM)/SPECS/*
@for i in $(SOURCES)/*; do \
rm -f $$i; \
done;
dist-clean-rpmdirs:
@for i in $(RPM)/{BUILD,SRPMS,RPMS,SPECS}/*; do \
rm -rf $$i; \
done;
dist-clean: dist-clean-sources dist-clean-configs dist-clean-rpmdirs
@rm -f $(REDHAT)/linux-*.tar.xz
dist-stub-key:
@echo "Copying pre-generated keys";
@echo "*** THIS IS NOT RECOMMENDED ***";
@echo "To be safe, keys should be created once for every build";
@echo "Use this option only for development builds";
@cp keys/stub_key.x509 $(_OUTPUT)/;
@cp keys/stub_key.priv $(_OUTPUT)/;
# force tarball to be regenerated if HEAD changes
.PHONY: $(TARBALL)
$(TARBALL):
@scripts/create-tarball.sh
.PHONY: $(KABI_TARBALL)
$(KABI_TARBALL):
@(cd kabi && tar cjf $(KABI_TARBALL) kabi-rhel$(RHEL_MAJOR)* kabi-current)
.PHONY: $(KABIDW_TARBALL)
$(KABIDW_TARBALL):
@if [ ! -d $(KABIDW)/base ]; then \
mkdir -p $(KABIDW)/base; \
fi
@(cd kabi-dwarf && tar cjf $(KABIDW_TARBALL) base run_kabi-dw.sh)
dist-git-version-check:
@# genspec.sh uses pathspec magic that wasn't introduced until version 2.13
@IFS=" ."; \
set -- $$($(GIT) --version); \
IFS=; \
if [ "$$3" -lt 2 -o \( "$$3" -eq 2 -a "$$4" -lt 13 \) ]; then \
echo "ERROR: You need git version 2.13 or newer to run some setup commands"; \
exit 1; \
fi
dist-get-buildreqs: setup-source
@PKGLIST="rpm-build $$(rpmspec -q --buildrequires $(SOURCES)/$(SPECFILE) | cut -d ' ' -f 1)"; \
MISSING=""; \
for pkg in $$PKGLIST; do \
rpm -q --whatprovides $$pkg >/dev/null || MISSING="$$MISSING $$pkg"; \
done; \
if [ -n "$$MISSING" ]; then \
echo " Missing dependencies: $$MISSING"; \
if echo "$$MISSING" | grep -q system-sb-certs ; then \
echo "system-sb-certs can be installed from a RHEL or Centos-Stream CodeReady Linux Builder (CRB) repository."; \
fi; \
else \
echo "PASS: All build dependencies found."; \
fi
_setup-source: dist-git-version-check
@cp $(REDHAT)/$(SPECFILE).template $(SOURCES)/$(SPECFILE)
@if [ ! -e $(REDHAT)/$(SPECCHANGELOG) ]; then \
echo "Creating an empty $(SPECCHANGELOG) since it does not exist yet"; \
touch $(REDHAT)/$(SPECCHANGELOG); \
fi
@if [ -z "$(RHSELFTESTDATA)" ]; then \
cp $(REDHAT)/$(SPECCHANGELOG) $(SOURCES)/$(SPECCHANGELOG); \
else \
echo "Mon Mar 28 2022 Fedora Kernel Team <kernel-team@fedoraproject.org> [$(BASEVERSION)]" > $(SOURCES)/$(SPECCHANGELOG); \
fi
@if [ -z "$(PATCHLIST_URL)" ]; then \
echo "Error: PATCHLIST_URL must be set (to 'none' or any URL)"; \
exit 1; \
fi
@$(REDHAT)/genspec.sh
@cp $(SOURCES)/$(SPECFILE) $(SOURCES)/../SPECS/
setup-source: dist-clean-sources _setup-source
generate-testpatch-tmp:
@$(GIT) diff --no-renames HEAD ":(exclude,top).get_maintainer.conf" \
":(exclude,top).gitattributes" \
":(exclude,top).gitignore" \
":(exclude,top)makefile" \
":(exclude,top)Makefile.rhelver" \
":(exclude,top)redhat" > $(TESTPATCH).tmp
sources-rh: $(TARBALL) generate-testpatch-tmp setup-source dist-configs-check
@cp -l $(TARBALL) $(SOURCES)/ || cp $(TARBALL) $(SOURCES)/
@touch $(TESTPATCH)
@diff $(TESTPATCH).tmp $(TESTPATCH) > /dev/null || \
echo "WARNING: There are uncommitted changes in your tree or the changes are not in sync with linux-kernel-test.patch. Either commit the changes or run 'make dist-test-patch'"
@rm $(TESTPATCH).tmp
@cp $(TESTPATCH) $(SOURCES)/linux-kernel-test.patch
@cat configs/flavors | while read flavor; do echo "Copying sources for $${flavor}"; [ -e $${flavor}_files ] && cp $${flavor}_files/* $(SOURCES); done
@sed -e "s/%%SPECKVERSION%%/$(SPECKVERSION)/" \
-e "s/%%SPECKPATCHLEVEL%%/$(SPECKPATCHLEVEL)/" \
rpminspect.yaml > $(SOURCES)/rpminspect.yaml
@$(REDHAT)/scripts/uki_addons/uki_create_json.py $(REDHAT)/scripts/uki_addons/uki_addons.json
@cp cpupower.* \
keys/rhel*.x509 \
keys/nvidia*.x509 \
kabi/check-kabi \
configs/$(PACKAGE_NAME)-*.config \
configs/partial*.config \
gating.yaml \
update_scripts.sh \
kvm_stat.logrotate \
mod-denylist.sh \
mod-internal.list \
mod-partner.list \
mod-sign.sh \
scripts/uki_addons/uki_create_addons.py \
scripts/uki_addons/uki_addons.json \
configs/flavors \
configs/generate_all_configs.sh \
configs/merge.pl \
configs/process_configs.sh \
parallel_xz.sh \
../Makefile.rhelver \
README.rst \
kernel-local \
dracut-virt.conf \
keys/redhatsecureboot504.cer \
$(SOURCES)/
@cat $$(ls -1 $(PACKAGE_NAME).changelog-* | sort -t '.' -k 3 -n -r) \
> $(SOURCES)/kernel.changelog
@for KABIARCH in $(ARCH_LIST); do \
cp kabi/Module.kabi_$$KABIARCH $(SOURCES)/; \
cp kabi/Module.kabi_dup_$$KABIARCH $(SOURCES)/; \
done
@(cd kabi && tar cjf $(KABI_TARBALL) kabi-rhel$(RHEL_MAJOR)* kabi-current)
@if [ ! -d $(KABIDW)/base ]; then \
mkdir -p $(KABIDW)/base; \
fi
@(cd kabi-dwarf && tar cjf $(KABIDW_TARBALL) base run_kabi-dw.sh)
dist-sources: dist-kabi dist-kabi-dup sources-rh
dist-test-patch: generate-testpatch-tmp
@mv $(TESTPATCH).tmp $(TESTPATCH);
do-rpmbuild: dist-sources
$(RPMBUILD) --define "_sourcedir $(SOURCES)" --define "_builddir $(RPM)/BUILD" --define "_srcrpmdir $(RPM)/SRPMS" --define "_rpmdir $(RPM)/RPMS" --define "_specdir $(RPM)/SPECS" --define "dist $(DIST)" $(RPMBUILDOPTS) $(RPM)/SOURCES/$(SPECFILE)
dist-all-rpms: RPMBUILDOPTS=--target $(MACH) -ba
dist-all-rpms: dist-sources do-rpmbuild
dist-srpm: RPMBUILDOPTS=--nodeps -bs
dist-srpm: dist-sources do-rpmbuild
dist-srpm-gcov: DISTLOCALVERSION=.gcov
dist-srpm-gcov: BUILDOPTS+=+gcov
dist-srpm-gcov: dist-srpm
dist-rpms: RPMBUILDOPTS=--target $(MACH) -bb
dist-rpms: dist-sources do-rpmbuild
dist-kernel-%: dist-sources
RPMBUILDOPTS="--target $(MACH) --with $* -bb" make do-rpmbuild
dist-prep: RPMBUILDOPTS=--nodeps --target noarch -bp
dist-prep: dist-sources do-rpmbuild
dist-perf: RPMBUILDOPTS=--without up --without smp --without zfcpdump --without debug --without doc --without headers --without doc --without debuginfo --target $(MACH) -bb
dist-perf: dist-sources do-rpmbuild
dist-rpm-baseonly: RPMBUILDOPTS=--target $(MACH) --without debug --without debuginfo --without vdso_install --without bpftool --without perf --without tools -bb
dist-rpm-baseonly: dist-sources do-rpmbuild
# unless you know what you're doing, you don't want to use the next four ones
dist-release-finish: setup-source
@cp $(SOURCES)/$(SPECCHANGELOG) $(REDHAT)/$(SPECCHANGELOG)
@echo $(MARKER) > $(REDHAT)/marker
@$(GIT) add $(REDHAT)/$(SPECCHANGELOG)
@$(GIT) add $(REDHAT)/marker
@$(GIT) commit -s ../Makefile.rhelver $(REDHAT)/marker $(REDHAT)/$(SPECCHANGELOG) $(SPECFILE).template -m "[redhat] $(DISTRELEASETAG)"
dist-release-changed:
@CLOGF="$$(mktemp)"; \
trap 'rm -f "$$CLOGF"' SIGHUP SIGINT SIGTERM EXIT; \
$(REDHAT)/genlog.sh "$$CLOGF"; \
if [ "$(MARKER)" == "$$(cat $(REDHAT)/marker)" ] && \
[ "$$(wc -l $$CLOGF | cut -d ' ' -f 1)" -le 3 ]; then \
echo "Nothing changed, skipping updates"; \
else \
$(REDHAT)/scripts/new_release.sh; \
$(MAKE) dist-release-finish; \
fi
dist-release: dist-clean-sources
@$(MAKE) dist-release-changed
dist-release-tag:
@$(GIT) tag -a -m "$(DISTRELEASETAG)" $(DISTRELEASETAG)
git-tree-check:
@if test -n "$(DIST_PUSH)" && test -z "$(shell $(GIT) remote get-url gitlab 2>/dev/null)"; then \
echo -e "Please run 'git remote add gitlab <url>' to enable git-push.\n"; \
exit 1; \
fi
@$(GIT) diff-index --quiet HEAD || \
{ echo -e "Dirty tree, please clean before merging.\n"; exit 1; }
dist-merge-upstream: git-tree-check
@if test "$(shell $(GIT) branch --show-current)" != "$(DIST_BRANCH)"; then \
echo -e "Please checkout $(DIST_BRANCH) branch before merging.\n"; \
exit 1; \
fi;
@# If TAG is empty, script defaults to master:HEAD
@$(GIT) checkout $(DIST_BRANCH)
@cd ..; $(REDHAT)/scripts/ci/ark-update-configs.sh $(TAG)
dist-merge-upstream-push: export DIST_PUSH="1"
dist-merge-upstream-push: dist-merge-upstream
dist-fedora-release: git-tree-check
@# If TAG is empty, script defaults to master:HEAD
@cd ..; $(REDHAT)/scripts/ci/ark-create-release.sh $(TAG) || \
(echo "Unable to create release tag"; exit 1)
dist-fedora-release-push: export DIST_PUSH="1"
dist-fedora-release-push: dist-fedora-release
dist-vr-check:
@# builds may include a s390x+zfcpdump arch build. UTS_RELEASE can only have a
@# version-release string with max 64 chars. The version-release for s390x+zfcpdump
@# is 29 characters, leaving a maximum of 35 characters for SPECBUILD.
@if [ $$(echo -n $(SPECBUILD) | wc -c) -gt 35 ]; then \
echo "SPECBUILD ($(SPECBUILD)) is too long. Use a shorter localversion (currently $(DISTLOCALVERSION))"; \
exit 1; \
fi
dist-brew: DIST=.el9
dist-brew: DISTRO=rhel
dist-brew dist-koji: dist-%: dist-vr-check dist-srpm
$* $(BUILD_PROFILE) build $(BUILD_FLAGS) --scratch $(BUILD_TARGET) $(SRPMS)/$(RELEASETAG)$(DIST).src.rpm $(OUTPUT_FILE)
distg-brew: DIST=.el9
distg-brew: DISTRO=rhel
distg-brew distg-koji: distg-%: dist-vr-check
$* $(BUILD_PROFILE) build $(BUILD_FLAGS) --scratch $(BUILD_TARGET) "$(RHGITURL)?redhat/koji#$(RHGITCOMMIT)"
.PHONY: $(REDHAT)/rpm/SOURCES/$(SPECFILE)
$(REDHAT)/rpm/SOURCES/$(SPECFILE):
@echo "dist-sources"
@$(MAKE) dist-sources
dist-git-test: export RH_DIST_GIT_TEST="1"
dist-git-test: dist-git
dist-git: dist-srpm $(KABI_TARBALL) $(KABIDW_TARBALL)
ifeq ("$(RHDISTGIT_BRANCH)", "")
$(error RHDISTGIT_BRANCH unset)
endif
$(REDHAT)/scripts/rh-dist-git.sh
dist-rtg: dist-release
@$(MAKE) dist-release-tag
@$(MAKE) dist-git
# RH_LATEST returns the value of the latest "known good" kernel from brew.
# This should not be confused with the latest top-of-tree development tag.
dist-get-latest:
$(eval RH_LATEST:=$(shell brew latest-pkg --quiet rhel-${RHEL_MAJOR}.${RHEL_MINOR}.0-candidate kernel | awk ' { print $$1 } '))
@echo "The latest kernel package tag is ${RH_LATEST}."
dist-os-version:
@echo "OSVERSION: $(RHEL_MAJOR).$(RHEL_MINOR)"
dist-dump-variables:
$(eval VARS:=$(sort $(shell cat Makefile.variables | sed '/^#/d; /^$$/d; s/[ ]*[?:]=.*//')))
@$(foreach V,$(sort $(.VARIABLES)), $(if $(filter-out environment default automatic, $(origin $V)),$(info $V=$($V) ),$(if $(filter $(VARS),$(V)),$(info $V=$($V)))))
dist-self-test:
@if test -x /usr/bin/bats; then \
RHEL_MAJOR=$(RHEL_MAJOR) RHEL_MINOR=$(RHEL_MINOR) bats $(REDHAT)/self-test/*.bats ; \
else \
echo "dist-self-test: The bats package is not installed" ; \
fi
dist-self-test-data:
./self-test/data/create-data.sh
dist-check-licenses:
@if test -x /usr/bin/bats; then \
bats $(REDHAT)/self-test/1007-spdx-licenses.bats ; \
else \
echo "dist-check-licenses: The bats package is not installed" ; \
fi
dist-help:
@echo 'Cleaning targets:'
@echo ' dist-clean - Clean redhat/configs/ and redhat/rpm/ directories.'
@echo ''
@echo 'Building targets:'
@echo ' dist-srpm - Create a source RPM.'
@echo ' dist-all-rpms - Create a source RPM and build binary RPMs locally.'
@echo ' dist-brew - Create a source RPM and call brew to build binary RPMs.'
@echo ' distg-brew - Build RPMs using a remote git repo.'
@echo ' [Configuration needed.]'
@echo ' dist-cross-all-rpms - Build RPMs for all supported archs using a cross'
@echo ' compiler.'
@echo ''
@echo 'Configuration targets:'
@echo ' dist-configs - Create RHEL config files in redhat/config/.'
@echo ''
@echo 'For detailed description and full list of targets, run `make dist-full-help`.'
@echo ''
dist-full-help:
@echo 'Cleaning targets:'
@echo ' dist-clean - Do dist-clean-sources, dist-clean-configs, &'
@echo ' dist-clean-rpmdirs.'
@echo ' dist-clean-sources - Clean the redhat/rpm/SOURCES/ directory.'
@echo ' dist-clean-configs - Clean the redhat/configs/ directory.'
@echo ' dist-clean-rpmdirs - Clean the redhat/rpm/{BUILD,SRPMS,RPMS,SPECS}/'
@echo ' directories.'
@echo ''
@echo 'Building targets:'
@echo ' All RPM/SRPM files will be put under the redhat/rpm/ directory.'
@echo ''
@echo ' dist-srpm - Create a source RPM and put it into the redhat/rpm/SRPMS/'
@echo ' directory. See the dist-brew target for available options.'
@echo ' dist-srpm-gcov - Create a source RPM with gcov enabled and put it into the'
@echo ' redhat/rpm/SRPMS/ directory.'
@echo ' dist-brew - Create a kernel SRPM and then call brew to build the'
@echo ' created SRPM. Add BUILDOPTS="+<opt> -<opt> [...]" to'
@echo ' enable/disable build options.'
@echo ' Available <opt>s and their default values:' \
$$(sed -n -e 's/^%define with_\([^ \t]*\).*\?_without_.*/+\1/p' \
-e 's/^%define with_\([^ \t]*\).*\?_with_.*/-\1/p' kernel.spec.template | \
grep -v 'only$$') | fmt -80
@echo ' dist-koji - Create a kernel SRPM and then call koji to build the'
@echo ' created SRPM. See the dist-brew target for available'
@echo ' options.'
@echo ' distg-brew - Pass HEAD of the current git branch to brew to build an'
@echo ' RPM set. Do not forget to push to the remote repository'
@echo ' first. Preceed make command by RHGITCOMMIT=<commitID>'
@echo ' specify commit ID to use.'
@echo ' To set the remote repo, invoke:'
@echo ' git config rhg.url git://<repo_path>'
@echo ' distg-koji - Pass HEAD of the current git branch to koji to build an'
@echo ' RPM set. Do not forget to push to the remote repository'
@echo ' first. See the distg-brew target for options and'
@echo ' configuration.'
@echo ' dist-rpms - Create the binary RPMS for the kernel.'
@echo ' See the dist-brew target for available options.'
@echo ' dist-rpm-baseonly - Create the binary RPMS for the kernel and modules'
@echo ' (no userspace tools or debuginfo).'
@echo ' dist-kernel-<type> - Create binary RPMS for a particular kernel type.'
@echo ' Available <type>s:'\
$$(sed -n 's/^%define with_\([^ ]*only\).*/\1/p' kernel.spec.template)
@echo ' dist-all-rpms - Create the binary RPMS and the SRPM for the kernel.'
@echo ' See the dist-brew target for available options.'
@echo ' dist-prep - Setup the redhat/rpm/BUILD/ directory with the kernel'
@echo ' source. See the dist-brew target for available options.'
@echo ' dist-test-patch - Create a diff against HEAD and put it in'
@echo ' linux-kernel-test.patch. This patch will'
@echo ' be added to the kernel build.'
@echo ' dist-stub-key - Use pre generated keys to speed local test builds.'
@echo ' dist-cross-download - [x86_64 only] download cross compiler rpms.'
@echo ' dist-cross-all-builds - [x86_64 only] execute "rpmbuild -bc" for all'
@echo ' supported archs using RHEL cross compiler.'
@echo ' dist-cross-<arch>-build - [x86_64 only] execute "rpmbuild -bc" for specified'
@echo ' <arch> using RHEL cross compiler.'
@echo ' Supported <arch>s: x86_64'\
$$(sed -n 's/.*--target \([^ ]*\).*/\1/p' Makefile.cross | sort -u)
@echo ' dist-cross-all-rpms - [x86_64 only] execute rpm builds for all supported'
@echo ' archs using RHEL cross compiler.'
@echo ' dist-cross-<arch>-rpms - [x86_64 only] execute rpm builds for specified'
@echo ' <arch> using RHEL cross compiler.'
@echo ' See dist-cross-<arch>-build for the supported archs.'
@echo ' dist-rhel-configs - build ELN configs'
@echo ' dist-fedora-configs - build Fedora configs'
@echo ''
@echo 'kABI targets:'
@echo ' dist-kabi - Create kABI stablelist files in redhat/kabi/kabi-rhel*/'
@echo ' and merge kABI checksums into redhat/kabi/Module.kabi_*.'
@echo ' dist-kabi-dup - Merge kABI checksums for Driver Update Program (DUP)'
@echo ' into redhat/kabi/Module.kabi_dup_*.'
@echo ' dist-check-kabi - Check for changes in kABI stablelisted symbols.'
@echo ' Requires a pre-compiled tree: run `make dist-configs`,'
@echo ' copy the relevant config file from redhat/configs/ to'
@echo ' .config, and run `make`.'
@echo ' dist-check-kabi-dup - Like dist-check-kabi but uses a DUP kABI stablelist.'
@echo ' dist-kabi-dw-base - Generate the base dataset for kABI DWARF-based check.'
@echo ' dist-kabi-dw-check - Run DWARF-based kABI comparison of current binaries'
@echo ' with the base dataset.'
@echo ' dist-kabi-update - Update kabi stablelist checksums.'
@echo ' dist-symtype-diff - Diff kabi stablelist and current kernel.'
@echo ''
@echo 'Configuration targets:'
@echo ' dist-configs - Creates config files for RHEL $(RHEL_MAJOR) architectures,'
@echo ' cleans them by running make nonint_oldconfig, and copies'
@echo ' them to redhat/configs/ directory. This is the target to use'
@echo ' for a config! Copy the config file you want from the'
@echo ' redhat/configs/ directory to .config'
@echo ' dist-configs-arch - Same as dist-configs but for single architecture only.'
@echo ''
@echo 'Misc targets:'
@echo ' dist-get-buildreqs - returns list of packages listed as build requirements'
@echo ' for this kernel'
@echo ' dist-get-latest - Returns the latest "known good" kernel from brew. This'
@echo ' should not be confused with the latest top-of-tree'
@echo ' development tag.'
@echo ' dist-os-version - Displays the current Red Hat Enterprise Linux versioni'
@echo ' target used by the current branch/tree.'
@echo ' dist-self-test - Runs self-tests from the redhat/self-test directory'
@echo ' dist-check-licenses - Runs license selftest checking SPDX-License-Identifier:'
@echo ' tags in all source files against `License:` field in the'
@echo ' specfile template.'
@echo ' dist-maint-update - Runs merge-subtrees.sh from the redhat/scripts/ directory'
@echo ''
export