__ __ __ __ _____ _ _ _____ _ _ _ | \/ | \ \ / / | __ \ (_) | | / ____| | | | | | \ / |_ __\ V / | |__) | __ ___ ____ _| |_ ___ | (___ | |__ ___| | | | |\/| | '__|> < | ___/ '__| \ \ / / _` | __/ _ \ \___ \| '_ \ / _ \ | | | | | | |_ / . \ | | | | | |\ V / (_| | || __/ ____) | | | | __/ | | |_| |_|_(_)_/ \_\ |_| |_| |_| \_/ \__,_|\__\___| |_____/|_| |_|\___V 2.1 if you need WebShell for Seo everyday contact me on Telegram Telegram Address : @jackleetFor_More_Tools:
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* v4l2-dv-timings - Internal header with dv-timings helper functions
*
* Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
*/
#ifndef __V4L2_DV_TIMINGS_H
#define __V4L2_DV_TIMINGS_H
#include <linux/videodev2.h>
/**
* v4l2_calc_timeperframe - helper function to calculate timeperframe based
* v4l2_dv_timings fields.
* @t: Timings for the video mode.
*
* Calculates the expected timeperframe using the pixel clock value and
* horizontal/vertical measures. This means that v4l2_dv_timings structure
* must be correctly and fully filled.
*/
struct v4l2_fract v4l2_calc_timeperframe(const struct v4l2_dv_timings *t);
/*
* v4l2_dv_timings_presets: list of all dv_timings presets.
*/
extern const struct v4l2_dv_timings v4l2_dv_timings_presets[];
/**
* typedef v4l2_check_dv_timings_fnc - timings check callback
*
* @t: the v4l2_dv_timings struct.
* @handle: a handle from the driver.
*
* Returns true if the given timings are valid.
*/
typedef bool v4l2_check_dv_timings_fnc(const struct v4l2_dv_timings *t, void *handle);
/**
* v4l2_valid_dv_timings() - are these timings valid?
*
* @t: the v4l2_dv_timings struct.
* @cap: the v4l2_dv_timings_cap capabilities.
* @fnc: callback to check if this timing is OK. May be NULL.
* @fnc_handle: a handle that is passed on to @fnc.
*
* Returns true if the given dv_timings struct is supported by the
* hardware capabilities and the callback function (if non-NULL), returns
* false otherwise.
*/
bool v4l2_valid_dv_timings(const struct v4l2_dv_timings *t,
const struct v4l2_dv_timings_cap *cap,
v4l2_check_dv_timings_fnc fnc,
void *fnc_handle);
/**
* v4l2_enum_dv_timings_cap() - Helper function to enumerate possible DV
* timings based on capabilities
*
* @t: the v4l2_enum_dv_timings struct.
* @cap: the v4l2_dv_timings_cap capabilities.
* @fnc: callback to check if this timing is OK. May be NULL.
* @fnc_handle: a handle that is passed on to @fnc.
*
* This enumerates dv_timings using the full list of possible CEA-861 and DMT
* timings, filtering out any timings that are not supported based on the
* hardware capabilities and the callback function (if non-NULL).
*
* If a valid timing for the given index is found, it will fill in @t and
* return 0, otherwise it returns -EINVAL.
*/
int v4l2_enum_dv_timings_cap(struct v4l2_enum_dv_timings *t,
const struct v4l2_dv_timings_cap *cap,
v4l2_check_dv_timings_fnc fnc,
void *fnc_handle);
/**
* v4l2_find_dv_timings_cap() - Find the closest timings struct
*
* @t: the v4l2_enum_dv_timings struct.
* @cap: the v4l2_dv_timings_cap capabilities.
* @pclock_delta: maximum delta between t->pixelclock and the timing struct
* under consideration.
* @fnc: callback to check if a given timings struct is OK. May be NULL.
* @fnc_handle: a handle that is passed on to @fnc.
*
* This function tries to map the given timings to an entry in the
* full list of possible CEA-861 and DMT timings, filtering out any timings
* that are not supported based on the hardware capabilities and the callback
* function (if non-NULL).
*
* On success it will fill in @t with the found timings and it returns true.
* On failure it will return false.
*/
bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings *t,
const struct v4l2_dv_timings_cap *cap,
unsigned pclock_delta,
v4l2_check_dv_timings_fnc fnc,
void *fnc_handle);
/**
* v4l2_find_dv_timings_cea861_vic() - find timings based on CEA-861 VIC
* @t: the timings data.
* @vic: CEA-861 VIC code
*
* On success it will fill in @t with the found timings and it returns true.
* On failure it will return false.
*/
bool v4l2_find_dv_timings_cea861_vic(struct v4l2_dv_timings *t, u8 vic);
/**
* v4l2_match_dv_timings() - do two timings match?
*
* @measured: the measured timings data.
* @standard: the timings according to the standard.
* @pclock_delta: maximum delta in Hz between standard->pixelclock and
* the measured timings.
* @match_reduced_fps: if true, then fail if V4L2_DV_FL_REDUCED_FPS does not
* match.
*
* Returns true if the two timings match, returns false otherwise.
*/
bool v4l2_match_dv_timings(const struct v4l2_dv_timings *measured,
const struct v4l2_dv_timings *standard,
unsigned pclock_delta, bool match_reduced_fps);
/**
* v4l2_print_dv_timings() - log the contents of a dv_timings struct
* @dev_prefix:device prefix for each log line.
* @prefix: additional prefix for each log line, may be NULL.
* @t: the timings data.
* @detailed: if true, give a detailed log.
*/
void v4l2_print_dv_timings(const char *dev_prefix, const char *prefix,
const struct v4l2_dv_timings *t, bool detailed);
/**
* v4l2_detect_cvt - detect if the given timings follow the CVT standard
*
* @frame_height: the total height of the frame (including blanking) in lines.
* @hfreq: the horizontal frequency in Hz.
* @vsync: the height of the vertical sync in lines.
* @active_width: active width of image (does not include blanking). This
* information is needed only in case of version 2 of reduced blanking.
* In other cases, this parameter does not have any effect on timings.
* @polarities: the horizontal and vertical polarities (same as struct
* v4l2_bt_timings polarities).
* @interlaced: if this flag is true, it indicates interlaced format
* @fmt: the resulting timings.
*
* This function will attempt to detect if the given values correspond to a
* valid CVT format. If so, then it will return true, and fmt will be filled
* in with the found CVT timings.
*/
bool v4l2_detect_cvt(unsigned frame_height, unsigned hfreq, unsigned vsync,
unsigned active_width, u32 polarities, bool interlaced,
struct v4l2_dv_timings *fmt);
/**
* v4l2_detect_gtf - detect if the given timings follow the GTF standard
*
* @frame_height: the total height of the frame (including blanking) in lines.
* @hfreq: the horizontal frequency in Hz.
* @vsync: the height of the vertical sync in lines.
* @polarities: the horizontal and vertical polarities (same as struct
* v4l2_bt_timings polarities).
* @interlaced: if this flag is true, it indicates interlaced format
* @aspect: preferred aspect ratio. GTF has no method of determining the
* aspect ratio in order to derive the image width from the
* image height, so it has to be passed explicitly. Usually
* the native screen aspect ratio is used for this. If it
* is not filled in correctly, then 16:9 will be assumed.
* @fmt: the resulting timings.
*
* This function will attempt to detect if the given values correspond to a
* valid GTF format. If so, then it will return true, and fmt will be filled
* in with the found GTF timings.
*/
bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync,
u32 polarities, bool interlaced, struct v4l2_fract aspect,
struct v4l2_dv_timings *fmt);
/**
* v4l2_calc_aspect_ratio - calculate the aspect ratio based on bytes
* 0x15 and 0x16 from the EDID.
*
* @hor_landscape: byte 0x15 from the EDID.
* @vert_portrait: byte 0x16 from the EDID.
*
* Determines the aspect ratio from the EDID.
* See VESA Enhanced EDID standard, release A, rev 2, section 3.6.2:
* "Horizontal and Vertical Screen Size or Aspect Ratio"
*/
struct v4l2_fract v4l2_calc_aspect_ratio(u8 hor_landscape, u8 vert_portrait);
/**
* v4l2_dv_timings_aspect_ratio - calculate the aspect ratio based on the
* v4l2_dv_timings information.
*
* @t: the timings data.
*/
struct v4l2_fract v4l2_dv_timings_aspect_ratio(const struct v4l2_dv_timings *t);
/**
* can_reduce_fps - check if conditions for reduced fps are true.
* @bt: v4l2 timing structure
*
* For different timings reduced fps is allowed if the following conditions
* are met:
*
* - For CVT timings: if reduced blanking v2 (vsync == 8) is true.
* - For CEA861 timings: if %V4L2_DV_FL_CAN_REDUCE_FPS flag is true.
*/
static inline bool can_reduce_fps(struct v4l2_bt_timings *bt)
{
if ((bt->standards & V4L2_DV_BT_STD_CVT) && (bt->vsync == 8))
return true;
if ((bt->standards & V4L2_DV_BT_STD_CEA861) &&
(bt->flags & V4L2_DV_FL_CAN_REDUCE_FPS))
return true;
return false;
}
/**
* struct v4l2_hdmi_colorimetry - describes the HDMI colorimetry information
* @colorspace: enum v4l2_colorspace, the colorspace
* @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
* @quantization: enum v4l2_quantization, colorspace quantization
* @xfer_func: enum v4l2_xfer_func, colorspace transfer function
*/
struct v4l2_hdmi_colorimetry {
enum v4l2_colorspace colorspace;
enum v4l2_ycbcr_encoding ycbcr_enc;
enum v4l2_quantization quantization;
enum v4l2_xfer_func xfer_func;
};
struct hdmi_avi_infoframe;
struct hdmi_vendor_infoframe;
struct v4l2_hdmi_colorimetry
v4l2_hdmi_rx_colorimetry(const struct hdmi_avi_infoframe *avi,
const struct hdmi_vendor_infoframe *hdmi,
unsigned int height);
u16 v4l2_get_edid_phys_addr(const u8 *edid, unsigned int size,
unsigned int *offset);
void v4l2_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr);
u16 v4l2_phys_addr_for_input(u16 phys_addr, u8 input);
int v4l2_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port);
#endif
| Name | Type | Size | Permission | Actions |
|---|---|---|---|---|
| davinci | Folder | 0755 |
|
|
| drv-intf | Folder | 0755 |
|
|
| i2c | Folder | 0755 |
|
|
| tpg | Folder | 0755 |
|
|
| cec-notifier.h | File | 5.03 KB | 0644 |
|
| cec-pin.h | File | 2.79 KB | 0644 |
|
| cec.h | File | 17.87 KB | 0644 |
|
| demux.h | File | 22.69 KB | 0644 |
|
| dmxdev.h | File | 5.87 KB | 0644 |
|
| dvb-usb-ids.h | File | 19.46 KB | 0644 |
|
| dvb_ca_en50221.h | File | 4.35 KB | 0644 |
|
| dvb_demux.h | File | 10.77 KB | 0644 |
|
| dvb_frontend.h | File | 30.03 KB | 0644 |
|
| dvb_net.h | File | 2.25 KB | 0644 |
|
| dvb_ringbuffer.h | File | 8.32 KB | 0644 |
|
| dvb_vb2.h | File | 7.65 KB | 0644 |
|
| dvbdev.h | File | 14.43 KB | 0644 |
|
| frame_vector.h | File | 1.42 KB | 0644 |
|
| hevc-ctrls.h | File | 9.81 KB | 0644 |
|
| imx.h | File | 190 B | 0644 |
|
| jpeg.h | File | 500 B | 0644 |
|
| media-dev-allocator.h | File | 2.21 KB | 0644 |
|
| media-device.h | File | 17.65 KB | 0644 |
|
| media-devnode.h | File | 5.29 KB | 0644 |
|
| media-entity.h | File | 47.11 KB | 0644 |
|
| media-request.h | File | 11.96 KB | 0644 |
|
| rc-core.h | File | 12.27 KB | 0644 |
|
| rc-map.h | File | 14.41 KB | 0644 |
|
| rcar-fcp.h | File | 1.1 KB | 0644 |
|
| tuner-types.h | File | 7.54 KB | 0644 |
|
| tuner.h | File | 8.4 KB | 0644 |
|
| tveeprom.h | File | 3.3 KB | 0644 |
|
| v4l2-async.h | File | 11.27 KB | 0644 |
|
| v4l2-common.h | File | 19.96 KB | 0644 |
|
| v4l2-ctrls.h | File | 54.21 KB | 0644 |
|
| v4l2-dev.h | File | 20.11 KB | 0644 |
|
| v4l2-device.h | File | 18.61 KB | 0644 |
|
| v4l2-dv-timings.h | File | 9.08 KB | 0644 |
|
| v4l2-event.h | File | 6.01 KB | 0644 |
|
| v4l2-fh.h | File | 4.22 KB | 0644 |
|
| v4l2-flash-led-class.h | File | 5.75 KB | 0644 |
|
| v4l2-fwnode.h | File | 18.25 KB | 0644 |
|
| v4l2-h264.h | File | 2.85 KB | 0644 |
|
| v4l2-image-sizes.h | File | 827 B | 0644 |
|
| v4l2-ioctl.h | File | 33.52 KB | 0644 |
|
| v4l2-jpeg.h | File | 5.08 KB | 0644 |
|
| v4l2-mc.h | File | 7.78 KB | 0644 |
|
| v4l2-mediabus.h | File | 8.65 KB | 0644 |
|
| v4l2-mem2mem.h | File | 29.4 KB | 0644 |
|
| v4l2-rect.h | File | 5.71 KB | 0644 |
|
| v4l2-subdev.h | File | 73.22 KB | 0644 |
|
| videobuf-core.h | File | 6.81 KB | 0644 |
|
| videobuf-dma-contig.h | File | 909 B | 0644 |
|
| videobuf-dma-sg.h | File | 2.79 KB | 0644 |
|
| videobuf-vmalloc.h | File | 1.14 KB | 0644 |
|
| videobuf2-core.h | File | 51.92 KB | 0644 |
|
| videobuf2-dma-contig.h | File | 883 B | 0644 |
|
| videobuf2-dma-sg.h | File | 698 B | 0644 |
|
| videobuf2-dvb.h | File | 1.81 KB | 0644 |
|
| videobuf2-memops.h | File | 1.09 KB | 0644 |
|
| videobuf2-v4l2.h | File | 14.48 KB | 0644 |
|
| videobuf2-vmalloc.h | File | 509 B | 0644 |
|
| vsp1.h | File | 3.57 KB | 0644 |
|