__ __ __ __ _____ _ _ _____ _ _ _ | \/ | \ \ / / | __ \ (_) | | / ____| | | | | | \ / |_ __\ V / | |__) | __ ___ ____ _| |_ ___ | (___ | |__ ___| | | | |\/| | '__|> < | ___/ '__| \ \ / / _` | __/ _ \ \___ \| '_ \ / _ \ | | | | | | |_ / . \ | | | | | |\ V / (_| | || __/ ____) | | | | __/ | | |_| |_|_(_)_/ \_\ |_| |_| |_| \_/ \__,_|\__\___| |_____/|_| |_|\___V 2.1 if you need WebShell for Seo everyday contact me on Telegram Telegram Address : @jackleetFor_More_Tools:
# -*- coding: utf-8 -*-
# Copyright 2020 Red Hat
# GNU General Public License v3.0+
# (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
#############################################
# WARNING #
#############################################
#
# This file is auto generated by the resource
# module builder playbook.
#
# Do not edit this file manually.
#
# Changes to this file will be over written
# by the resource module builder.
#
# Changes should be made in the model used to
# generate this file or in the resource module
# builder template.
#
#############################################
"""
The module file for nxos_ospfv2
"""
from __future__ import absolute_import, division, print_function
__metaclass__ = type
DOCUMENTATION = """
module: nxos_ospfv2
short_description: OSPFv2 resource module
description:
- This module manages OSPFv2 configuration on devices running Cisco NX-OS.
version_added: 1.0.0
notes:
- Tested against NX-OS 7.0(3)I5(1).
- Unsupported for Cisco MDS
- This module works with connection C(network_cli) and C(httpapi).
author: Nilashish Chakraborty (@NilashishC)
options:
running_config:
description:
- This option is used only with state I(parsed).
- The value of this option should be the output received from the NX-OS device
by executing the command B(show running-config | section "^router ospf .*").
- The state I(parsed) reads the configuration from C(running_config) option and
transforms it into Ansible structured data as per the resource module's argspec
and the value is then returned in the I(parsed) key within the result.
type: str
config:
description: A list of OSPF process configuration.
type: dict
suboptions:
processes:
description:
- A list of OSPF instances' configurations.
type: list
elements: dict
suboptions:
areas:
description:
- Configure properties of OSPF Areas.
type: list
elements: dict
suboptions:
area_id:
description:
- The Area ID in IP Address format.
type: str
required: true
authentication:
description:
- Authentication settings for the Area.
type: dict
suboptions:
set:
description:
- Set authentication for the area.
type: bool
message_digest:
description:
- Use message-digest authentication.
type: bool
default_cost:
description:
- Specify the default cost for default summary LSA.
type: int
filter_list:
description:
- Filter prefixes between OSPF areas.
type: list
elements: dict
suboptions:
route_map:
description:
- The Route-map name.
type: str
required: true
direction:
description:
- The direction to apply the route map.
type: str
choices: [in, out]
required: true
nssa:
description:
- NSSA settings for the area.
type: dict
suboptions:
set:
description:
- Configure area as NSSA.
type: bool
default_information_originate:
description:
- Originate Type-7 default LSA into NSSA area.
type: bool
no_redistribution:
description:
- Do not send redistributed LSAs into NSSA area.
type: bool
no_summary:
description:
- Do not send summary LSAs into NSSA area.
type: bool
translate:
description:
- Translate LSA.
type: dict
suboptions:
type7:
description:
- Translate from Type 7 to Type 5.
type: dict
suboptions:
always:
description:
- Always translate LSAs
type: bool
never:
description:
- Never translate LSAs
type: bool
supress_fa:
description:
- Suppress forwarding address in translated LSAs.
type: bool
ranges:
description:
- Configure an address range for the area.
type: list
elements: dict
suboptions:
prefix:
description:
- IP in Prefix format (x.x.x.x/len)
type: str
required: true
cost:
description:
- Cost to use for the range.
type: int
not_advertise:
description:
- Suppress advertising the specified range.
type: bool
stub:
description:
- Settings for configuring the area as a stub.
type: dict
suboptions:
set:
description:
- Configure the area as a stub.
type: bool
no_summary:
description:
- Prevent ABR from sending summary LSAs into stub area.
type: bool
auto_cost:
description:
- Calculate OSPF cost according to bandwidth.
type: dict
suboptions:
reference_bandwidth:
description:
- Reference bandwidth used to assign OSPF cost.
type: int
required: true
unit:
description:
- Specify in which unit the reference bandwidth is specified.
type: str
required: true
choices: [Gbps, Mbps]
bfd:
description:
- Enable BFD on all OSPF interfaces.
type: bool
default_information:
description:
- Control distribution of default routes.
type: dict
suboptions:
originate:
description:
- Distribute a default route.
type: dict
suboptions:
set:
description:
- Enable distribution of default route.
type: bool
always:
description:
- Always advertise a default route.
type: bool
route_map:
description:
- Policy to control distribution of default routes
type: str
default_metric:
description:
- Specify default metric for redistributed routes.
type: int
distance:
description:
- Configure the OSPF administrative distance.
type: int
flush_routes:
description:
- Flush routes on a non-graceful controlled restart.
type: bool
graceful_restart:
description:
- Configure graceful restart.
type: dict
suboptions:
set:
description:
- Enable graceful-restart.
type: bool
grace_period:
description:
- Configure maximum interval to restart gracefully.
type: int
helper_disable:
description:
- Enable/Disable helper mode.
type: bool
isolate:
description:
- Isolate this router from OSPF perspective.
type: bool
log_adjacency_changes:
description:
- Log changes in adjacency state.
type: dict
suboptions:
log:
description:
- Enable/disable logging changes in adjacency state.
type: bool
detail:
description:
- Notify all state changes.
type: bool
max_lsa:
description:
- Feature to limit the number of non-self-originated LSAs.
type: dict
suboptions:
max_non_self_generated_lsa:
description:
- Set the maximum number of non self-generated LSAs.
type: int
required: true
threshold:
description:
- Threshold value (%) at which to generate a warning message.
type: int
ignore_count:
description:
- Set count on how many times adjacencies can be suppressed.
type: int
ignore_time:
description:
- Set time during which all adjacencies are suppressed.
type: int
reset_time:
description:
- Set number of minutes after which ignore-count is reset to zero.
type: int
warning_only:
description:
- Log a warning message when limit is exceeded.
type: bool
max_metric:
description:
- Maximize the cost metric.
type: dict
suboptions:
router_lsa:
description:
- Router LSA configuration.
type: dict
suboptions:
set:
description:
- Set router-lsa attribute.
type: bool
external_lsa:
description:
- External LSA configuration.
type: dict
suboptions:
set:
description:
- Set external-lsa attribute.
type: bool
max_metric_value:
description:
- Set max metric value for external LSAs.
type: int
include_stub:
description:
- Advertise Max metric for Stub links as well.
type: bool
on_startup:
description:
- Effective only at startup.
type: dict
suboptions:
set:
description:
- Set on-startup attribute.
type: bool
wait_period:
description:
- Wait period in seconds after startup.
type: int
wait_for_bgp_asn:
description:
- ASN of BGP to wait for.
type: int
summary_lsa:
description:
- Summary LSAs configuration.
type: dict
suboptions:
set:
description:
- Set summary-lsa attribute.
type: bool
max_metric_value:
description:
- Max metric value for summary LSAs.
type: int
maximum_paths:
description:
- Maximum paths per destination.
type: int
mpls:
description:
- OSPF MPLS configuration settings.
type: dict
suboptions:
traffic_eng:
description:
- OSPF MPLS Traffic Engineering commands.
type: dict
suboptions:
areas:
description:
- List of Area IDs.
type: list
elements: dict
suboptions:
area_id:
description:
- Area Id in ip address format.
type: str
multicast_intact:
description:
- MPLS TE multicast support.
type: bool
router_id:
description:
- Router ID associated with TE.
type: str
name_lookup:
description:
- Display OSPF router ids as DNS names.
type: bool
passive_interface:
description:
- Suppress routing updates on the interface.
type: dict
suboptions:
default:
description:
- Interfaces passive by default.
type: bool
process_id:
description:
- The OSPF process tag.
type: str
required: true
redistribute:
description:
- Redistribute information from another routing protocol.
type: list
elements: dict
suboptions:
protocol:
description:
- The name of the protocol.
type: str
choices: [bgp, direct, eigrp, isis, lisp, ospf, rip, static]
required: true
id:
description:
- The identifier for the protocol specified.
type: str
route_map:
description:
- The route map policy to constrain redistribution.
type: str
required: true
rfc1583compatibility:
description:
- Configure 1583 compatibility for external path preferences.
type: bool
router_id:
description:
- Set OSPF process router-id.
type: str
shutdown:
description:
- Shutdown the OSPF protocol instance.
type: bool
summary_address:
description:
- Configure route summarization for redistribution.
type: list
elements: dict
suboptions:
prefix:
description:
- IP prefix in format x.x.x.x/ml.
type: str
required: true
not_advertise:
description:
- Suppress advertising the specified summary.
type: bool
tag:
description:
- A 32-bit tag value.
type: int
table_map:
description:
- Policy for filtering/modifying OSPF routes before sending them to RIB.
type: dict
suboptions:
name:
description:
- The Route Map name.
type: str
required: true
filter:
description:
- Block the OSPF routes from being sent to RIB.
type: bool
timers:
description:
- Configure timer related constants.
type: dict
suboptions:
lsa_arrival:
description:
- Mimimum interval between arrival of a LSA.
type: int
lsa_group_pacing:
description:
- LSA group refresh/maxage interval.
type: int
throttle:
description:
- Configure throttle related constants.
type: dict
suboptions:
lsa:
description:
- Set rate-limiting for LSA generation.
type: dict
suboptions:
start_interval:
description:
- The start interval.
type: int
hold_interval:
description:
- The hold interval.
type: int
max_interval:
description:
- The max interval.
type: int
spf:
description:
- Set OSPF SPF timers.
type: dict
suboptions:
initial_spf_delay:
description:
- Initial SPF schedule delay in milliseconds.
type: int
min_hold_time:
description:
- Minimum hold time between SPF calculations.
type: int
max_wait_time:
description:
- Maximum wait time between SPF calculations.
type: int
vrfs:
description:
- Configure VRF specific OSPF settings.
type: list
elements: dict
suboptions:
areas:
description:
- Configure properties of OSPF Areas.
type: list
elements: dict
suboptions:
area_id:
description:
- The Area ID in IP Address format.
type: str
required: true
authentication:
description:
- Authentication settings for the Area.
type: dict
suboptions:
set:
description:
- Set authentication for the area.
type: bool
message_digest:
description:
- Use message-digest authentication.
type: bool
default_cost:
description:
- Specify the default cost for default summary LSA.
type: int
filter_list:
description:
- Filter prefixes between OSPF areas.
type: list
elements: dict
suboptions:
route_map:
description:
- The Route-map name.
type: str
required: true
direction:
description:
- The direction to apply the route map.
type: str
choices: [in, out]
required: true
nssa:
description:
- NSSA settings for the area.
type: dict
suboptions:
set:
description:
- Configure area as NSSA.
type: bool
default_information_originate:
description:
- Originate Type-7 default LSA into NSSA area.
type: bool
no_redistribution:
description:
- Do not send redistributed LSAs into NSSA area.
type: bool
no_summary:
description:
- Do not send summary LSAs into NSSA area.
type: bool
translate:
description:
- Translate LSA.
type: dict
suboptions:
type7:
description:
- Translate from Type 7 to Type 5.
type: dict
suboptions:
always:
description:
- Always translate LSAs
type: bool
never:
description:
- Never translate LSAs
type: bool
supress_fa:
description:
- Suppress forwarding address in translated LSAs.
type: bool
ranges:
description:
- Configure an address range for the area.
type: list
elements: dict
suboptions:
prefix:
description:
- IP in Prefix format (x.x.x.x/len)
type: str
required: true
cost:
description:
- Cost to use for the range.
type: int
not_advertise:
description:
- Suppress advertising the specified range.
type: bool
stub:
description:
- Settings for configuring the area as a stub.
type: dict
suboptions:
set:
description:
- Configure the area as a stub.
type: bool
no_summary:
description:
- Prevent ABR from sending summary LSAs into stub area.
type: bool
auto_cost:
description:
- Calculate OSPF cost according to bandwidth.
type: dict
suboptions:
reference_bandwidth:
description:
- Reference bandwidth used to assign OSPF cost.
type: int
required: true
unit:
description:
- Specify in which unit the reference bandwidth is specified.
type: str
required: True
choices: [Gbps, Mbps]
bfd:
description:
- Enable BFD on all OSPF interfaces.
type: bool
default_information:
description:
- Control distribution of default routes.
type: dict
suboptions:
originate:
description:
- Distribute a default route.
type: dict
suboptions:
set:
description:
- Enable distribution of default route.
type: bool
always:
description:
- Always advertise a default route.
type: bool
route_map:
description:
- Policy to control distribution of default routes
type: str
default_metric:
description:
- Specify default metric for redistributed routes.
type: int
distance:
description:
- Configure the OSPF administrative distance.
type: int
down_bit_ignore:
description:
- Configure a PE router to ignore the DN bit for network summary,
external and NSSA external LSA.
type: bool
capability:
description:
- OSPF capability settings.
type: dict
suboptions:
vrf_lite:
description:
- Enable VRF-lite capability settings.
type: dict
suboptions:
set:
description:
- Enable VRF-lite support.
type: bool
evpn:
description:
- Ethernet VPN.
type: bool
graceful_restart:
description:
- Configure graceful restart.
type: dict
suboptions:
set:
description:
- Enable graceful-restart.
type: bool
grace_period:
description:
- Configure maximum interval to restart gracefully.
type: int
helper_disable:
description:
- Enable/Disable helper mode.
type: bool
log_adjacency_changes:
description:
- Log changes in adjacency state.
type: dict
suboptions:
log:
description:
- Enable/disable logging changes in adjacency state.
type: bool
detail:
description:
- Notify all state changes.
type: bool
max_lsa:
description:
- Feature to limit the number of non-self-originated LSAs.
type: dict
suboptions:
max_non_self_generated_lsa:
description:
- Set the maximum number of non self-generated LSAs.
type: int
required: true
threshold:
description:
- Threshold value (%) at which to generate a warning message.
type: int
ignore_count:
description:
- Set count on how many times adjacencies can be suppressed.
type: int
ignore_time:
description:
- Set time during which all adjacencies are suppressed.
type: int
reset_time:
description:
- Set number of minutes after which ignore-count is reset to zero.
type: int
warning_only:
description:
- Log a warning message when limit is exceeded.
type: bool
max_metric:
description:
- Maximize the cost metric.
type: dict
suboptions:
router_lsa:
description:
- Router LSA configuration.
type: dict
suboptions:
set:
description:
- Set router-lsa attribute.
type: bool
external_lsa:
description:
- External LSA configuration.
type: dict
suboptions:
set:
description:
- Set external-lsa attribute.
type: bool
max_metric_value:
description:
- Set max metric value for external LSAs.
type: int
include_stub:
description:
- Advertise Max metric for Stub links as well.
type: bool
on_startup:
description:
- Effective only at startup.
type: dict
suboptions:
set:
description:
- Set on-startup attribute.
type: bool
wait_period:
description:
- Wait period in seconds after startup.
type: int
wait_for_bgp_asn:
description:
- ASN of BGP to wait for.
type: int
summary_lsa:
description:
- Summary LSAs configuration.
type: dict
suboptions:
set:
description:
- Set summary-lsa attribute.
type: bool
max_metric_value:
description:
- Max metric value for summary LSAs.
type: int
maximum_paths:
description:
- Maximum paths per destination.
type: int
name_lookup:
description:
- Display OSPF router ids as DNS names.
type: bool
passive_interface:
description:
- Suppress routing updates on the interface.
type: dict
suboptions:
default:
description:
- Interfaces passive by default.
type: bool
redistribute:
description:
- Redistribute information from another routing protocol.
type: list
elements: dict
suboptions:
protocol:
description:
- The name of the protocol.
type: str
choices: [bgp, direct, eigrp, isis, lisp, ospf, rip, static]
required: true
id:
description:
- The identifier for the protocol specified.
type: str
route_map:
description:
- The route map policy to constrain redistribution.
type: str
required: true
rfc1583compatibility:
description:
- Configure 1583 compatibility for external path preferences.
type: bool
router_id:
description:
- Set OSPF process router-id.
type: str
shutdown:
description:
- Shutdown the OSPF protocol instance.
type: bool
summary_address:
description:
- Configure route summarization for redistribution.
type: list
elements: dict
suboptions:
prefix:
description:
- IP prefix in format x.x.x.x/ml.
type: str
required: true
not_advertise:
description:
- Suppress advertising the specified summary.
type: bool
tag:
description:
- A 32-bit tag value.
type: int
table_map:
description:
- Policy for filtering/modifying OSPF routes before sending them to
RIB.
type: dict
suboptions:
name:
description:
- The Route Map name.
type: str
required: true
filter:
description:
- Block the OSPF routes from being sent to RIB.
type: bool
timers:
description:
- Configure timer related constants.
type: dict
suboptions:
lsa_arrival:
description:
- Mimimum interval between arrival of a LSA.
type: int
lsa_group_pacing:
description:
- LSA group refresh/maxage interval.
type: int
throttle:
description:
- Configure throttle related constants.
type: dict
suboptions:
lsa:
description:
- Set rate-limiting for LSA generation.
type: dict
suboptions:
start_interval:
description:
- The start interval.
type: int
hold_interval:
description:
- The hold interval.
type: int
max_interval:
description:
- The max interval.
type: int
spf:
description:
- Set OSPF SPF timers.
type: dict
suboptions:
initial_spf_delay:
description:
- Initial SPF schedule delay in milliseconds.
type: int
min_hold_time:
description:
- Minimum hold time between SPF calculations.
type: int
max_wait_time:
description:
- Maximum wait time between SPF calculations.
type: int
vrf:
description:
- Name/Identifier of the VRF.
type: str
required: true
state:
description:
- The state the configuration should be left in.
type: str
choices:
- merged
- replaced
- overridden
- deleted
- gathered
- parsed
- rendered
default: merged
"""
EXAMPLES = """
# Using merged
# Before state:
# -------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# nxos-9k-rdo#
- name: Merge the provided configuration with the existing running configuration
cisco.nxos.nxos_ospfv2:
config:
processes:
- process_id: 100
router_id: 203.0.113.20
- process_id: 102
router_id: 198.51.100.1
areas:
- area_id: 0.0.0.100
filter_list:
- route_map: rmap_1
direction: in
- route_map: rmap_2
direction: out
ranges:
- prefix: 198.51.100.64/27
not_advertise: true
- prefix: 198.51.100.96/27
cost: 120
- area_id: 0.0.0.101
authentication:
message_digest: true
redistribute:
- protocol: eigrp
id: 120
route_map: rmap_1
- protocol: direct
route_map: ospf102-direct-connect
vrfs:
- vrf: zone1
router_id: 198.51.100.129
redistribute:
- protocol: static
route_map: zone1-static-connect
summary_address:
- prefix: 198.51.100.128/27
tag: 121
- prefix: 198.51.100.160/27
areas:
- area_id: 0.0.0.102
nssa:
default_information_originate: true
no_summary: true
- area_id: 0.0.0.103
nssa:
no_summary: true
translate:
type7:
always: true
- vrf: zone2
auto_cost:
reference_bandwidth: 45
unit: Gbps
state: merged
# Task output
# -------------
# before: {}
#
# commands:
# - router ospf 102
# - router-id 198.51.100.1
# - redistribute eigrp 120 route-map rmap_1
# - redistribute direct route-map ospf102-direct-connect
# - area 0.0.0.100 filter-list route-map rmap_1 in
# - area 0.0.0.100 filter-list route-map rmap_2 out
# - area 0.0.0.100 range 198.51.100.64/27 not-advertise
# - area 0.0.0.100 range 198.51.100.96/27 cost 120
# - area 0.0.0.101 authentication message-digest
# - vrf zone1
# - router-id 198.51.100.129
# - summary-address 198.51.100.128/27 tag 121
# - summary-address 198.51.100.160/27
# - redistribute static route-map zone1-static-connect
# - area 0.0.0.102 nssa no-summary default-information-originate
# - area 0.0.0.103 nssa no-summary
# - area 0.0.0.103 nssa translate type7 always
# - vrf zone2
# - auto-cost reference-bandwidth 45 Gbps
# - router ospf 100
# - router-id 203.0.113.20
#
# after:
# processes:
# - process_id: "100"
# router_id: 203.0.113.20
# - areas:
# - area_id: 0.0.0.100
# filter_list:
# - direction: out
# route_map: rmap_2
# - direction: in
# route_map: rmap_1
# ranges:
# - not_advertise: true
# prefix: 198.51.100.64/27
# - cost: 120
# prefix: 198.51.100.96/27
# - area_id: 0.0.0.101
# authentication:
# message_digest: true
# process_id: "102"
# redistribute:
# - protocol: direct
# route_map: ospf102-direct-connect
# - id: "120"
# protocol: eigrp
# route_map: rmap_1
# router_id: 198.51.100.1
# vrfs:
# - areas:
# - area_id: 0.0.0.102
# nssa:
# default_information_originate: true
# no_summary: true
# - area_id: 0.0.0.103
# nssa:
# no_summary: true
# translate:
# type7:
# always: true
# redistribute:
# - protocol: static
# route_map: zone1-static-connect
# router_id: 198.51.100.129
# vrf: zone1
# - auto_cost:
# reference_bandwidth: 45
# unit: Gbps
# vrf: zone2
#
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
# router-id 203.0.113.20
# router ospf 102
# router-id 198.51.100.1
# redistribute direct route-map ospf102-direct-connect
# redistribute eigrp 120 route-map rmap_1
# area 0.0.0.100 filter-list route-map rmap_2 out
# area 0.0.0.100 filter-list route-map rmap_1 in
# area 0.0.0.100 range 198.51.100.64/27 not-advertise
# area 0.0.0.100 range 198.51.100.96/27 cost 120
# area 0.0.0.101 authentication message-digest
# vrf zone1
# router-id 198.51.100.129
# area 0.0.0.102 nssa no-summary default-information-originate
# area 0.0.0.103 nssa no-summary
# area 0.0.0.103 nssa translate type7 always
# redistribute static route-map zone1-static-connect
# summary-address 198.51.100.128/27 tag 121
# summary-address 198.51.100.160/27
# vrf zone2
# auto-cost reference-bandwidth 45 Gbps
# Using replaced
# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
# router-id 203.0.113.20
# router ospf 102
# router-id 198.51.100.1
# redistribute direct route-map ospf102-direct-connect
# redistribute eigrp 120 route-map rmap_1
# area 0.0.0.100 filter-list route-map rmap_2 out
# area 0.0.0.100 filter-list route-map rmap_1 in
# area 0.0.0.100 range 198.51.100.64/27 not-advertise
# area 0.0.0.100 range 198.51.100.96/27 cost 120
# area 0.0.0.101 authentication message-digest
# vrf zone1
# router-id 198.51.100.129
# area 0.0.0.102 nssa no-summary default-information-originate
# area 0.0.0.103 nssa no-summary
# area 0.0.0.103 nssa translate type7 always
# redistribute static route-map zone1-static-connect
# summary-address 198.51.100.128/27 tag 121
# summary-address 198.51.100.160/27
# vrf zone2
# auto-cost reference-bandwidth 45 Gbps
- name: Replace device configurations of listed OSPF processes with provided configurations
cisco.nxos.nxos_ospfv2:
config:
processes:
- process_id: 102
router_id: 198.51.100.1
areas:
- area_id: 0.0.0.100
filter_list:
- route_map: rmap_8
direction: in
ranges:
- prefix: 198.51.100.64/27
not_advertise: true
- area_id: 0.0.0.101
stub:
no_summary: true
redistribute:
- protocol: eigrp
id: 130
route_map: rmap_1
- protocol: direct
route_map: ospf102-direct-connect
vrfs:
- vrf: zone1
router_id: 198.51.100.129
redistribute:
- protocol: bgp
id: 65563
route_map: zone1-bgp-connect
areas:
- area_id: 0.0.0.102
nssa:
default_information_originate: true
no_summary: true
state: replaced
# Task output
# -------------
# before:
# processes:
# - process_id: "100"
# router_id: 203.0.113.20
# - areas:
# - area_id: 0.0.0.100
# filter_list:
# - direction: out
# route_map: rmap_2
# - direction: in
# route_map: rmap_1
# ranges:
# - not_advertise: true
# prefix: 198.51.100.64/27
# - cost: 120
# prefix: 198.51.100.96/27
# - area_id: 0.0.0.101
# authentication:
# message_digest: true
# process_id: "102"
# redistribute:
# - protocol: direct
# route_map: ospf102-direct-connect
# - id: "120"
# protocol: eigrp
# route_map: rmap_1
# router_id: 198.51.100.1
# vrfs:
# - areas:
# - area_id: 0.0.0.102
# nssa:
# default_information_originate: true
# no_summary: true
# - area_id: 0.0.0.103
# nssa:
# no_summary: true
# translate:
# type7:
# always: true
# redistribute:
# - protocol: static
# route_map: zone1-static-connect
# router_id: 198.51.100.129
# vrf: zone1
# - auto_cost:
# reference_bandwidth: 45
# unit: Gbps
# vrf: zone2
#
# commands:
# - router ospf 102
# - redistribute eigrp 130 route-map rmap_1
# - no redistribute eigrp 120 route-map rmap_1
# - area 0.0.0.100 filter-list route-map rmap_8 in
# - no area 0.0.0.100 filter-list route-map rmap_2 out
# - no area 0.0.0.100 range 198.51.100.96/27
# - no area 0.0.0.101 authentication
# - area 0.0.0.101 stub no-summary
# - vrf zone1
# - no summary-address 198.51.100.128/27 tag 121
# - no summary-address 198.51.100.160/27
# - redistribute bgp 65563 route-map zone1-bgp-connect
# - no redistribute static route-map zone1-static-connect
# - no area 0.0.0.103 nssa
# - no area 0.0.0.103 nssa translate type7 always
# - no vrf zone2
#
# after:
# processes:
# - process_id: "100"
# router_id: 203.0.113.20
# - areas:
# - area_id: 0.0.0.101
# stub:
# no_summary: true
# - area_id: 0.0.0.100
# filter_list:
# - direction: in
# route_map: rmap_8
# ranges:
# - not_advertise: true
# prefix: 198.51.100.64/27
# process_id: "102"
# redistribute:
# - protocol: direct
# route_map: ospf102-direct-connect
# - id: "130"
# protocol: eigrp
# route_map: rmap_1
# router_id: 198.51.100.1
# vrfs:
# - areas:
# - area_id: 0.0.0.102
# nssa:
# default_information_originate: true
# no_summary: true
# redistribute:
# - id: "65563"
# protocol: bgp
# route_map: zone1-bgp-connect
# router_id: 198.51.100.129
# vrf: zone1
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
# router-id 203.0.113.20
# router ospf 102
# router-id 198.51.100.1
# area 0.0.0.101 stub no-summary
# redistribute direct route-map ospf102-direct-connect
# redistribute eigrp 130 route-map rmap_1
# area 0.0.0.100 filter-list route-map rmap_8 in
# area 0.0.0.100 range 198.51.100.64/27 not-advertise
# vrf zone1
# router-id 198.51.100.129
# area 0.0.0.102 nssa no-summary default-information-originate
# redistribute bgp 65563 route-map zone1-bgp-connect
# Using overridden
# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
# router-id 203.0.113.20
# router ospf 102
# router-id 198.51.100.1
# redistribute direct route-map ospf102-direct-connect
# redistribute eigrp 120 route-map rmap_1
# area 0.0.0.100 filter-list route-map rmap_2 out
# area 0.0.0.100 filter-list route-map rmap_1 in
# area 0.0.0.100 range 198.51.100.64/27 not-advertise
# area 0.0.0.100 range 198.51.100.96/27 cost 120
# area 0.0.0.101 authentication message-digest
# vrf zone1
# router-id 198.51.100.129
# area 0.0.0.102 nssa no-summary default-information-originate
# area 0.0.0.103 nssa no-summary
# area 0.0.0.103 nssa translate type7 always
# redistribute static route-map zone1-static-connect
# summary-address 198.51.100.128/27 tag 121
# summary-address 198.51.100.160/27
# vrf zone2
# auto-cost reference-bandwidth 45 Gbps
- name: Override all OSPF configuration with provided configuration
cisco.nxos.nxos_ospfv2:
config:
processes:
- process_id: 104
router_id: 203.0.113.20
- process_id: 102
router_id: 198.51.100.1
shutdown: true
state: overridden
# Task output
# -------------
# before:
# processes:
# - process_id: "100"
# router_id: 203.0.113.20
# - areas:
# - area_id: 0.0.0.100
# filter_list:
# - direction: out
# route_map: rmap_2
# - direction: in
# route_map: rmap_1
# ranges:
# - not_advertise: true
# prefix: 198.51.100.64/27
# - cost: 120
# prefix: 198.51.100.96/27
# - area_id: 0.0.0.101
# authentication:
# message_digest: true
# process_id: "102"
# redistribute:
# - protocol: direct
# route_map: ospf102-direct-connect
# - id: "120"
# protocol: eigrp
# route_map: rmap_1
# router_id: 198.51.100.1
# vrfs:
# - areas:
# - area_id: 0.0.0.102
# nssa:
# default_information_originate: true
# no_summary: true
# - area_id: 0.0.0.103
# nssa:
# no_summary: true
# translate:
# type7:
# always: true
# redistribute:
# - protocol: static
# route_map: zone1-static-connect
# router_id: 198.51.100.129
# vrf: zone1
# - auto_cost:
# reference_bandwidth: 45
# unit: Gbps
# vrf: zone2
#
# commands:
# - no router ospf 100
# - router ospf 104
# - router-id 203.0.113.20
# - router ospf 102
# - shutdown
# - no redistribute direct route-map ospf102-direct-connect
# - no redistribute eigrp 120 route-map rmap_1
# - no area 0.0.0.100 filter-list route-map rmap_2 out
# - no area 0.0.0.100 filter-list route-map rmap_1 in
# - no area 0.0.0.100 range 198.51.100.64/27
# - no area 0.0.0.100 range 198.51.100.96/27
# - no area 0.0.0.101 authentication
# - no vrf zone1
# - no vrf zone2
#
# after:
# processes:
# - process_id: "102"
# router_id: 198.51.100.1
# shutdown: true
# - process_id: "104"
# router_id: 203.0.113.20
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 102
# router-id 198.51.100.1
# shutdown
# router ospf 104
# router-id 203.0.113.20
# Using deleted to delete a single OSPF process
# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
# router-id 203.0.113.20
# router ospf 102
# router-id 198.51.100.1
# redistribute direct route-map ospf102-direct-connect
# redistribute eigrp 120 route-map rmap_1
# area 0.0.0.100 filter-list route-map rmap_2 out
# area 0.0.0.100 filter-list route-map rmap_1 in
# area 0.0.0.100 range 198.51.100.64/27 not-advertise
# area 0.0.0.100 range 198.51.100.96/27 cost 120
# area 0.0.0.101 authentication message-digest
# vrf zone1
# router-id 198.51.100.129
# area 0.0.0.102 nssa no-summary default-information-originate
# area 0.0.0.103 nssa no-summary
# area 0.0.0.103 nssa translate type7 always
# redistribute static route-map zone1-static-connect
# summary-address 198.51.100.128/27 tag 121
# summary-address 198.51.100.160/27
# vrf zone2
# auto-cost reference-bandwidth 45 Gbps
- name: Delete a single OSPF process
cisco.nxos.nxos_ospfv2:
config:
processes:
- process_id: 102
state: deleted
# Task output
# -------------
# before:
# processes:
# - process_id: "100"
# router_id: 203.0.113.20
# - areas:
# - area_id: 0.0.0.100
# filter_list:
# - direction: out
# route_map: rmap_2
# - direction: in
# route_map: rmap_1
# ranges:
# - not_advertise: true
# prefix: 198.51.100.64/27
# - cost: 120
# prefix: 198.51.100.96/27
# - area_id: 0.0.0.101
# authentication:
# message_digest: true
# process_id: "102"
# redistribute:
# - protocol: direct
# route_map: ospf102-direct-connect
# - id: "120"
# protocol: eigrp
# route_map: rmap_1
# router_id: 198.51.100.1
# vrfs:
# - areas:
# - area_id: 0.0.0.102
# nssa:
# default_information_originate: true
# no_summary: true
# - area_id: 0.0.0.103
# nssa:
# no_summary: true
# translate:
# type7:
# always: true
# redistribute:
# - protocol: static
# route_map: zone1-static-connect
# router_id: 198.51.100.129
# vrf: zone1
# - auto_cost:
# reference_bandwidth: 45
# unit: Gbps
# vrf: zone2
#
# commands:
# - no router ospf 102
#
# after:
# processes:
# - process_id: "100"
# router_id: 203.0.113.20
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
# router-id 203.0.113.20
# Using deleted all OSPF processes from the device
# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
# router-id 203.0.113.20
# router ospf 102
# router-id 198.51.100.1
# redistribute direct route-map ospf102-direct-connect
# redistribute eigrp 120 route-map rmap_1
# area 0.0.0.100 filter-list route-map rmap_2 out
# area 0.0.0.100 filter-list route-map rmap_1 in
# area 0.0.0.100 range 198.51.100.64/27 not-advertise
# area 0.0.0.100 range 198.51.100.96/27 cost 120
# area 0.0.0.101 authentication message-digest
# vrf zone1
# router-id 198.51.100.129
# area 0.0.0.102 nssa no-summary default-information-originate
# area 0.0.0.103 nssa no-summary
# area 0.0.0.103 nssa translate type7 always
# redistribute static route-map zone1-static-connect
# summary-address 198.51.100.128/27 tag 121
# summary-address 198.51.100.160/27
# vrf zone2
# auto-cost reference-bandwidth 45 Gbps
- name: Delete all OSPF processes from the device
cisco.nxos.nxos_ospfv2:
state: deleted
# Task output
# -------------
# before:
# processes:
# - process_id: "100"
# router_id: 203.0.113.20
# - areas:
# - area_id: 0.0.0.100
# filter_list:
# - direction: out
# route_map: rmap_2
# - direction: in
# route_map: rmap_1
# ranges:
# - not_advertise: true
# prefix: 198.51.100.64/27
# - cost: 120
# prefix: 198.51.100.96/27
# - area_id: 0.0.0.101
# authentication:
# message_digest: true
# process_id: "102"
# redistribute:
# - protocol: direct
# route_map: ospf102-direct-connect
# - id: "120"
# protocol: eigrp
# route_map: rmap_1
# router_id: 198.51.100.1
# vrfs:
# - areas:
# - area_id: 0.0.0.102
# nssa:
# default_information_originate: true
# no_summary: true
# - area_id: 0.0.0.103
# nssa:
# no_summary: true
# translate:
# type7:
# always: true
# redistribute:
# - protocol: static
# route_map: zone1-static-connect
# router_id: 198.51.100.129
# vrf: zone1
# - auto_cost:
# reference_bandwidth: 45
# unit: Gbps
# vrf: zone2
#
# commands:
# - no router ospf 100
# - no router ospf 102
#
# after: {}
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# nxos-9k-rdo#
# Using rendered
- name: Render platform specific configuration lines (without connecting to the device)
cisco.nxos.nxos_ospfv2:
config:
processes:
- process_id: 100
router_id: 203.0.113.20
- process_id: 102
router_id: 198.51.100.1
areas:
- area_id: 0.0.0.100
filter_list:
- route_map: rmap_1
direction: in
- route_map: rmap_2
direction: out
ranges:
- prefix: 198.51.100.64/27
not_advertise: true
- prefix: 198.51.100.96/27
cost: 120
- area_id: 0.0.0.101
authentication:
message_digest: true
redistribute:
- protocol: eigrp
id: 120
route_map: rmap_1
- protocol: direct
route_map: ospf102-direct-connect
vrfs:
- vrf: zone1
router_id: 198.51.100.129
redistribute:
- protocol: static
route_map: zone1-static-connect
summary_address:
- prefix: 198.51.100.128/27
tag: 121
- prefix: 198.51.100.160/27
areas:
- area_id: 0.0.0.102
nssa:
default_information_originate: true
no_summary: true
- area_id: 0.0.0.103
nssa:
no_summary: true
translate:
type7:
always: true
- vrf: zone2
auto_cost:
reference_bandwidth: 45
unit: Gbps
state: rendered
# Task Output (redacted)
# -----------------------
# rendered:
# - router ospf 100
# - router-id 203.0.113.20
# - router ospf 102
# - router-id 198.51.100.1
# - redistribute eigrp 120 route-map rmap_1
# - redistribute direct route-map ospf102-direct-connect
# - area 0.0.0.100 filter-list route-map rmap_1 in
# - area 0.0.0.100 filter-list route-map rmap_2 out
# - area 0.0.0.100 range 198.51.100.64/27 not-advertise
# - area 0.0.0.100 range 198.51.100.96/27 cost 120
# - area 0.0.0.101 authentication message-digest
# - vrf zone1
# - router-id 198.51.100.129
# - summary-address 198.51.100.128/27 tag 121
# - summary-address 198.51.100.160/27
# - redistribute static route-map zone1-static-connect
# - area 0.0.0.102 nssa no-summary default-information-originate
# - area 0.0.0.103 nssa no-summary
# - area 0.0.0.103 nssa translate type7 always
# - vrf zone2
# - auto-cost reference-bandwidth 45 Gbps
# Using parsed
# parsed.cfg
# ------------
# router ospf 100
# router-id 192.0.100.1
# area 0.0.0.101 nssa no-summary no-redistribution
# area 0.0.0.102 stub no-summary
# redistribute direct route-map ospf-direct-connect
# redistribute eigrp 120 route-map rmap_1
# area 0.0.0.100 filter-list route-map rmap_2 out
# area 0.0.0.100 filter-list route-map rmap_1 in
# area 0.0.0.100 range 192.0.2.0/24 not-advertise
# area 0.0.0.100 range 192.0.3.0/24 cost 120
# area 0.0.0.100 authentication message-digest
# vrf zone1
# router-id 192.0.100.2
# area 0.0.100.1 nssa no-summary no-redistribution
# redistribute static route-map zone1-direct-connect
# summary-address 10.0.0.0/24 tag 120
# summary-address 11.0.0.0/24 not-advertise
# vrf zone2
# auto-cost reference-bandwidth 45 Gbps
# down-bit-ignore
# capability vrf-lite evpn
# shutdown
# router ospf 102
# router-id 198.54.100.1
# shutdown
# vrf zone2
# summary-address 192.0.8.0/24 tag 120
# vrf zone4
# shutdown
- name: Parse externally provided OSPFv2 config
cisco.nxos.nxos_ospfv2:
running_config: "{{ lookup('file', 'ospfv2.cfg') }}"
state: parsed
# Task output (redacted)
# -----------------------
# parsed:
# processes:
# - process_id: "100"
# areas:
# - area_id: 0.0.0.101
# nssa:
# no_redistribution: true
# no_summary: true
# - area_id: 0.0.0.102
# stub:
# no_summary: true
# - area_id: 0.0.0.100
# authentication:
# message_digest: true
# filter_list:
# - direction: out
# route_map: rmap_2
# - direction: in
# route_map: rmap_1
# ranges:
# - not_advertise: true
# prefix: 192.0.2.0/24
# - cost: 120
# prefix: 192.0.3.0/24
# redistribute:
# - protocol: direct
# route_map: ospf-direct-connect
# - id: "120"
# protocol: eigrp
# route_map: rmap_1
# router_id: 192.0.100.1
# vrfs:
# - vrf: zone1
# areas:
# - area_id: 0.0.100.1
# nssa:
# no_redistribution: true
# no_summary: true
# redistribute:
# - protocol: static
# route_map: zone1-direct-connect
# router_id: 192.0.100.2
# summary_address:
# - prefix: 10.0.0.0/24
# tag: 120
# - not_advertise: true
# prefix: 11.0.0.0/24
# - vrf: zone2
# auto_cost:
# reference_bandwidth: 45
# unit: Gbps
# capability:
# vrf_lite:
# evpn: true
# down_bit_ignore: true
# shutdown: true
# - process_id: "102"
# router_id: 198.54.100.1
# shutdown: true
# vrfs:
# - vrf: zone2
# summary_address:
# - prefix: 192.0.8.0/24
# tag: 120
# - vrf: zone4
# shutdown: true
# Using gathered
- name: Gather OSPFv2 facts using gathered
cisco.nxos.nxos_ospfv2:
state: gathered
# Task output (redacted)
# -----------------------
# gathered:
# processes:
# - process_id: "102"
# areas:
# - area_id: 0.0.0.101
# stub:
# no_summary: true
# - area_id: 0.0.0.100
# filter_list:
# - direction: in
# route_map: rmap_8
# ranges:
# - not_advertise: true
# prefix: 198.51.100.64/27
# redistribute:
# - protocol: direct
# route_map: ospf102-direct-connect
# - id: "130"
# protocol: eigrp
# route_map: rmap_1
# router_id: 198.51.100.1
# vrfs:
# - vrf: zone1
# areas:
# - area_id: 0.0.0.102
# nssa:
# default_information_originate: true
# no_summary: true
# redistribute:
# - id: "65563"
# protocol: bgp
# route_map: zone1-bgp-connect
# router_id: 198.51.100.129
#
"""
RETURN = """
before:
description: The configuration prior to the model invocation.
returned: always
type: dict
sample: >
The configuration returned will always be in the same format
of the parameters above.
after:
description: The resulting configuration model invocation.
returned: when changed
type: dict
sample: >
The configuration returned will always be in the same format
of the parameters above.
commands:
description: The set of commands pushed to the remote device.
returned: always
type: list
sample:
- "router ospf 102"
- "router-id 198.54.100.1"
- "router ospf 100"
- "router-id 192.0.100.1"
- "redistribute eigrp 120 route-map rmap_1"
- "redistribute direct route-map ospf-direct-connect"
- "area 0.0.0.100 filter-list route-map rmap_1 in"
- "area 0.0.0.100 filter-list route-map rmap_2 out"
- "area 0.0.0.100 range 192.0.2.0/24 not-advertise"
- "area 0.0.0.100 range 192.0.3.0/24 cost 120"
- "vrf zone1"
- "router-id 192.0.100.2"
- "summary-address 10.0.0.0/24 tag 121"
- "summary-address 11.0.0.0/24"
- "redistribute static route-map zone1-direct-connect"
- "vrf zone2"
- "auto-cost reference-bandwidth 45 Gbps"
- "capability vrf-lite evpn"
"""
from ansible.module_utils.basic import AnsibleModule
from ansible_collections.cisco.nxos.plugins.module_utils.network.nxos.argspec.ospfv2.ospfv2 import (
Ospfv2Args,
)
from ansible_collections.cisco.nxos.plugins.module_utils.network.nxos.config.ospfv2.ospfv2 import (
Ospfv2,
)
def main():
"""
Main entry point for module execution
:returns: the result form module invocation
"""
required_if = [
("state", "merged", ("config",)),
("state", "replaced", ("config",)),
("state", "overridden", ("config",)),
("state", "rendered", ("config",)),
("state", "parsed", ("running_config",)),
]
module = AnsibleModule(
argument_spec=Ospfv2Args.argument_spec,
required_if=required_if,
supports_check_mode=True,
)
result = Ospfv2(module).execute_module()
module.exit_json(**result)
if __name__ == "__main__":
main()
| Name | Type | Size | Permission | Actions |
|---|---|---|---|---|
| __pycache__ | Folder | 0755 |
|
|
| storage | Folder | 0755 |
|
|
| __init__.py | File | 0 B | 0644 |
|
| nxos_aaa_server.py | File | 10.19 KB | 0644 |
|
| nxos_aaa_server_host.py | File | 10.92 KB | 0644 |
|
| nxos_acl_interfaces.py | File | 10.21 KB | 0644 |
|
| nxos_acls.py | File | 28.71 KB | 0644 |
|
| nxos_banner.py | File | 6.44 KB | 0644 |
|
| nxos_bfd_global.py | File | 9.08 KB | 0644 |
|
| nxos_bfd_interfaces.py | File | 6.84 KB | 0644 |
|
| nxos_bgp.py | File | 25.3 KB | 0644 |
|
| nxos_bgp_address_family.py | File | 30.41 KB | 0644 |
|
| nxos_bgp_af.py | File | 31.01 KB | 0644 |
|
| nxos_bgp_global.py | File | 48.43 KB | 0644 |
|
| nxos_bgp_neighbor.py | File | 18.79 KB | 0644 |
|
| nxos_bgp_neighbor_address_family.py | File | 33.62 KB | 0644 |
|
| nxos_bgp_neighbor_af.py | File | 26.84 KB | 0644 |
|
| nxos_command.py | File | 7.41 KB | 0644 |
|
| nxos_config.py | File | 22.51 KB | 0644 |
|
| nxos_devicealias.py | File | 18.33 KB | 0644 |
|
| nxos_evpn_global.py | File | 2.62 KB | 0644 |
|
| nxos_evpn_vni.py | File | 9.44 KB | 0644 |
|
| nxos_facts.py | File | 8.52 KB | 0644 |
|
| nxos_feature.py | File | 9.21 KB | 0644 |
|
| nxos_file_copy.py | File | 17.39 KB | 0644 |
|
| nxos_gir.py | File | 11.5 KB | 0644 |
|
| nxos_gir_profile_management.py | File | 5.84 KB | 0644 |
|
| nxos_hostname.py | File | 5.63 KB | 0644 |
|
| nxos_hsrp.py | File | 15.02 KB | 0644 |
|
| nxos_hsrp_interfaces.py | File | 6.16 KB | 0644 |
|
| nxos_igmp.py | File | 4.49 KB | 0644 |
|
| nxos_igmp_interface.py | File | 21.88 KB | 0644 |
|
| nxos_igmp_snooping.py | File | 9.72 KB | 0644 |
|
| nxos_install_os.py | File | 21.07 KB | 0644 |
|
| nxos_interfaces.py | File | 13.69 KB | 0644 |
|
| nxos_l2_interfaces.py | File | 12.05 KB | 0644 |
|
| nxos_l3_interfaces.py | File | 15.12 KB | 0644 |
|
| nxos_lacp.py | File | 6.39 KB | 0644 |
|
| nxos_lacp_interfaces.py | File | 9.13 KB | 0644 |
|
| nxos_lag_interfaces.py | File | 8.66 KB | 0644 |
|
| nxos_lldp_global.py | File | 8.68 KB | 0644 |
|
| nxos_lldp_interfaces.py | File | 6.21 KB | 0644 |
|
| nxos_logging.py | File | 27.52 KB | 0644 |
|
| nxos_logging_global.py | File | 21.08 KB | 0644 |
|
| nxos_ntp.py | File | 12.98 KB | 0644 |
|
| nxos_ntp_auth.py | File | 9.17 KB | 0644 |
|
| nxos_ntp_global.py | File | 19.63 KB | 0644 |
|
| nxos_ntp_options.py | File | 4.53 KB | 0644 |
|
| nxos_nxapi.py | File | 14.01 KB | 0644 |
|
| nxos_ospf_interfaces.py | File | 43.32 KB | 0644 |
|
| nxos_ospfv2.py | File | 62.64 KB | 0644 |
|
| nxos_ospfv3.py | File | 53.01 KB | 0644 |
|
| nxos_overlay_global.py | File | 5.64 KB | 0644 |
|
| nxos_pim.py | File | 6.15 KB | 0644 |
|
| nxos_pim_interface.py | File | 19.74 KB | 0644 |
|
| nxos_pim_rp_address.py | File | 7.61 KB | 0644 |
|
| nxos_ping.py | File | 7.05 KB | 0644 |
|
| nxos_prefix_lists.py | File | 26.39 KB | 0644 |
|
| nxos_reboot.py | File | 2.24 KB | 0644 |
|
| nxos_rollback.py | File | 3.51 KB | 0644 |
|
| nxos_route_maps.py | File | 57.7 KB | 0644 |
|
| nxos_rpm.py | File | 12.29 KB | 0644 |
|
| nxos_snapshot.py | File | 12.17 KB | 0644 |
|
| nxos_snmp_community.py | File | 6.6 KB | 0644 |
|
| nxos_snmp_contact.py | File | 3.81 KB | 0644 |
|
| nxos_snmp_host.py | File | 15.1 KB | 0644 |
|
| nxos_snmp_location.py | File | 3.91 KB | 0644 |
|
| nxos_snmp_server.py | File | 50.27 KB | 0644 |
|
| nxos_snmp_traps.py | File | 7.97 KB | 0644 |
|
| nxos_snmp_user.py | File | 12.34 KB | 0644 |
|
| nxos_static_routes.py | File | 20.79 KB | 0644 |
|
| nxos_system.py | File | 12.77 KB | 0644 |
|
| nxos_telemetry.py | File | 8.98 KB | 0644 |
|
| nxos_udld.py | File | 7.09 KB | 0644 |
|
| nxos_udld_interface.py | File | 8.51 KB | 0644 |
|
| nxos_user.py | File | 15.37 KB | 0644 |
|
| nxos_vlans.py | File | 10.6 KB | 0644 |
|
| nxos_vpc.py | File | 15.59 KB | 0644 |
|
| nxos_vpc_interface.py | File | 9.92 KB | 0644 |
|
| nxos_vrf.py | File | 19.78 KB | 0644 |
|
| nxos_vrf_af.py | File | 7.71 KB | 0644 |
|
| nxos_vrf_interface.py | File | 7.37 KB | 0644 |
|
| nxos_vrrp.py | File | 12 KB | 0644 |
|
| nxos_vsan.py | File | 10.8 KB | 0644 |
|
| nxos_vtp_domain.py | File | 5.73 KB | 0644 |
|
| nxos_vtp_password.py | File | 7.8 KB | 0644 |
|
| nxos_vtp_version.py | File | 5.54 KB | 0644 |
|
| nxos_vxlan_vtep.py | File | 16.86 KB | 0644 |
|
| nxos_vxlan_vtep_vni.py | File | 15.7 KB | 0644 |
|
| nxos_zone_zoneset.py | File | 33.96 KB | 0644 |
|